Follow the next steps to define transverse stiffener.
Go to Transverse Stiffener. | 
|
|---|---|
Pick or set the Girder. | |
Enter the Station, Side of Web and Material. | |
Go to Dimensions tab to edit the stiffener inputs. |  |
Go to 3D Detailing tab to edit the stiffener 3D Detailing inputs. | 
|
Go to FEM tab to enable/disable Stiffener FEM. |  |
Follow the below steps to copy and paste all inputs from our data set.
| 1 | Go to Transverse Stiffener under Stiffeners on the tree view. |
| 2 | Copy Dimensions, 3D Detailing and FEM from model inputs and paste into OpenBrIM. |
Completed transverse stiffener is illustrated below.
Copy the desired data with the automatic copy button in the upper left corner. Click on the first cell in and use the Ctrl+V shortcut to paste.  
If icon won’t appear, collapse page tree menu by clicking on arrow or using shortcut “[”.  While pasting large data, it would be handy to turn of Auto-refresh . 
|
Transverse Stiffener | |||
General STFT1 G4 130.2414 Both A709_50W STFT3 G4 90.2414 Both A709_50W | Dimensions STFT1 1.0000 12.0000 0.0000 0.0000 STFT3 1.0000 12.0000 0.0000 0.0000
| 3D Detailing STFT1 3.5000 2.5000 STFT3 3.5000 2.5000
| FEM STFT1 NO STFT3 NO
|
0 Comments