Please follow the instructions provided below to define the reference support lines where the piers will be located.
Navigate to Bridge Geometry > Support Lines |  |
To create the support line at Station 23846 ft for the Bridge, Click on the three-dot icon located on the first cell of the Bridge and set it to "Bridge1". | |
Follow the same process to create the support lines for the remaining structures at their respective stations. Set the support line for Pier1 at Station 23897 ft, Pier2 at Station 23982 ft, and Abut2 at Station 24027 ft. |  |
Define the skew angle of the support line as in the figure |  |
Offset values use PGL as the reference point.  |
To access additional details on each parameter, please refer to the following page.
Follow the below steps to copy and paste all inputs from our data set.
| 1 | To access additional details on each parameter, please refer to the following page. |
| 2 | Navigate to Support Lines under Bridge Geometry. |
| 3 | Copy Bridge Parameters from model inputs and paste into OpenBrIM. |
Completed Support Lines are illustrated below.
|
Copy the desired data with the automatic copy button in the upper left corner. Click on the first cell in and use the Ctrl+V shortcut to paste.  
If icon won’t appear, collapse page tree menu by clicking on arrow or using shortcut “[”.  While pasting large data, it would be handy to turn of Auto-refresh . 
|
Support Lines |
|---|
Bridge Parameters |
Abut1 Bridge1 23846.0000 5.8000 0.0000 Pier1 Bridge1 23897.0000 5.3000 0.0000 Pier2 Bridge1 23982.0000 10.1000 0.0000 Abut2 Bridge1 24027.0000 14.7000 0.0000 |
0 Comments