End Diaphragm
Diaphragm Location:
Connected Girders:
Depth:
Additional Overhang Length Transverse Direction:
Thickness (Downstation w.r.t Support Line):
Thickness (Upstation w.r.t Support Line): Enter the thickness value used to calculate the weight of the end diaphragm. Stiffness of the created finite elements is not affected by this input. During construction of diaphragms, the user can decide whether to include the diaphragm weight as a load or to ignore the diaphragm load effects in the model.
User can define skew values for end diaphragms. However, if the defined Support Line is at the start of the girder unit or at the end of the girder unit, Start Skew [deg] or End Skew [deg] values are automatically assigned to the Support Line’s skew value, respectively.
Material: Set the material for the end diaphragm. It is possible to consider the weight of the end diaphragm and apply it as loads in stage construction analysis.
0 Comments