Please follow the instructions provided below to add F shape barriers to Right sides of the bridge.
| 1 | Navigate to Superstructure Attachments > F Shape Barrier |  |
| 2 | The F barrier will be defined on all decks, specifically on the right side of each deck. Click three-dots icon on Deck cell and set Span1. | |
| 3 | Select the Orientation of the barrier for the right side as in the figure. |  |
| 4 | Set the concrete Material of the barrier to Fc_3_2ksi_NoStiffness. |  |
| 5 | Enter Start Transverse Location and End Transverse Location as Right. |  |
| 6 | Navigate to Dimension tab at spreadsheet. |  |
| 7 | Enter the dimension parameters as in the figure | |
| 8 | To create F barriers for the 2nd and 3rd spans, please follow the previous steps and repeat them accordingly. Also enter the names of the F Shape Barriers as in the figure. |  |
| 9 | ||
Offset values use PGL as the reference point.  |
Follow the below steps to copy and paste all inputs from our data set.
| 1 | Navigate to F Shape Barrier under Superstructure Attachments on the tree view. |
| 2 | Copy F Shape Barrier, and Dimensions from model inputs and paste into OpenBrIM. |
The F Shape Barrier that have been created are illustrated below.
Copy the desired data with the automatic copy button in the upper left corner. Click on the first cell in and use the Ctrl+V shortcut to paste.  
If icon won’t appear, collapse page tree menu by clicking on arrow or using shortcut “[”.  While pasting large data, it would be handy to turn of Auto-refresh . 
|
F Shape Barrier | |
|---|---|
F Shape Barrier | Dimensions |
BR1 Span1 Right Fc_3_2ksi_NoStiffness Right Right BR2 Span2 Right Fc_3_2ksi_NoStiffness Right Right BR3 Span3 Right Fc_3_2ksi_NoStiffness Right Right | BR1 32 18.5 13 10.75 0 BR2 32 18.5 13 10.75 0 BR3 32 18.5 13 10.75 0 |
0 Comments