Please follow the instructions provided below to define construction of substructure bridge components.
| 1 | Navigate to Loading > Construction > Substructure > Pier Cap/Bent Construction (Partial) |  |
| 2 | Click three-dots icon on Stage cell and click select. | |
| 3 | Select "BridgeConst" as stage. |  |
| 4 | Click three-dots icon on Pier Caps/Bents cell and set as EndBent1 In this section, we did not select all Pier Caps/Bents at the same time. This is because these related structures will be builded partial. |  |
| 5 | Keep the default parameter values without making any changes. |  |
| 6 | Please repeat the previous steps for all the Pier Caps/Bents in the project. |  |
Follow the below steps to copy and paste all inputs from our data set.
| 1 | Navigate to Pier Cap/Bent Construction (Partial) under Substructure on the tree view. |
| 2 | Copy Pier Cap/Bent Construction from model inputs and paste into OpenBrIM. |
Copy the desired data with the automatic copy button in the upper left corner. Click on the first cell in and use the Ctrl+V shortcut to paste.  
If icon won’t appear, collapse page tree menu by clicking on arrow or using shortcut “[”.  While pasting large data, it would be handy to turn of Auto-refresh . 
|
Pier Cap/Bent Construction |
|---|
General |
EndBent1Const BridgeConst EndBent1 0.0000 Left 1.0000 EndBent2Const BridgeConst EndBent2 0.0000 Left 1.0000 PierCap1Const BridgeConst PierCap1 0.0000 Left 1.0000 PierCap2Const BridgeConst PierCap2 0.0000 Left 1.0000 |
0 Comments