Please follow the instructions provided below to add Line Loads
Navigate to Loads > Line Load |   |
Click on the three-dots icon in the Line cell and set BarrierRetrofit to identify the construction stages that have a line load. Then enter the names as “BarrierRetrofitLoad” | |
Click three-dots icon on Stage cell and click select.
Enter the stage data as follows:
|   |
Enter the magnitudes of the (Line) Loads to be applied on line as in the figure. |  |
In this step, set the Element's object, which indicates which line load will be applied to line. Click three-dots icon on Element cell and set as “Deck” |  |
To create all line loads in the project, follow the previous steps and repeat them for each line load. |  |
Follow the below steps to copy and paste all inputs from our data set.
| 1 | Navigate to Surface Load under Loads on the tree view. |
| 2 | Copy General from model inputs and paste into OpenBrIM. |
Copy the desired data with the automatic copy button in the upper left corner. Click on the first cell in and use the Ctrl+V shortcut to paste.  
If icon won’t appear, collapse page tree menu by clicking on arrow or using shortcut “[”.  While pasting large data, it would be handy to turn of Auto-refresh . 
|
Line Load |
|---|
General |
BarrierRetrofit BarrierConst 0.0000 0.0000 0.3000 0.0000 0.0000 0.0000 Deck SIPG1Sp1 SIPFormConst 0.0000 0.0000 0.0200 0.0000 0.0000 0.0000 Girder SIPG2Sp1 SIPFormConst 0.0000 0.0000 0.0300 0.0000 0.0000 0.0000 Girder SIPG3Sp1p SIPFormConst 0.0000 0.0000 0.0233 0.0000 0.0000 0.0000 Girder SIPG4Sp1 DeckConst 0.0000 0.0000 0.1260 0.0000 0.0000 0.0000 Girder SIPG5Sp1 DeckConst 0.0000 0.0000 0.1260 0.0000 0.0000 0.0000 Girder SIPG6Sp1 DeckConst 0.0000 0.0000 0.1260 0.0000 0.0000 0.0000 Girder SIPG7Sp1 DeckConst 0.0000 0.0000 0.0630 0.0000 0.0000 0.0000 Girder SIPG1Sp2 SIPFormConst 0.0000 0.0000 0.0180 0.0000 0.0000 0.0000 Girder SIPG2Sp2 SIPFormConst 0.0000 0.0000 0.0280 0.0000 0.0000 0.0000 Girder SIPG3Sp2p SIPFormConst 0.0000 0.0000 0.0233 0.0000 0.0000 0.0000 Girder SIPG4Sp2 DeckConst 0.0000 0.0000 0.0750 0.0000 0.0000 0.0000 Girder SIPG5Sp2 DeckConst 0.0000 0.0000 0.0750 0.0000 0.0000 0.0000 Girder SIPG6Sp2 DeckConst 0.0000 0.0000 0.0750 0.0000 0.0000 0.0000 Girder SIPG7Sp2 DeckConst 0.0000 0.0000 0.0750 0.0000 0.0000 0.0000 Girder SIPG8Sp2 DeckConst 0.0000 0.0000 0.0750 0.0000 0.0000 0.0000 Girder SIPG9Sp2 DeckConst 0.0000 0.0000 0.0380 0.0000 0.0000 0.0000 Girder SIPG1Sp3 SIPFormConst 0.0000 0.0000 0.0200 0.0000 0.0000 0.0000 Girder SIPG2Sp3 SIPFormConst 0.0000 0.0000 0.0300 0.0000 0.0000 0.0000 Girder SIPG3Sp3p SIPFormConst 0.0000 0.0000 0.0233 0.0000 0.0000 0.0000 Girder SIPG4Sp3 DeckConst 0.0000 0.0000 0.1240 0.0000 0.0000 0.0000 Girder SIPG5Sp3 DeckConst 0.0000 0.0000 0.1240 0.0000 0.0000 0.0000 Girder SIPG6Sp3 DeckConst 0.0000 0.0000 0.1240 0.0000 0.0000 0.0000 Girder SIPG7Sp3 DeckConst 0.0000 0.0000 0.0620 0.0000 0.0000 0.0000 Girder EB1e_DL DeckConst 0.0000 0.0000 3.0070 0.0000 0.0000 0.0000 Pier Cap and Bents EB1p_DL DeckConstHard 0.0000 0.0000 2.9890 0.0000 0.0000 0.0000 Pier Cap and Bents EB2e_DL DeckConst 0.0000 0.0000 3.0070 0.0000 0.0000 0.0000 Pier Cap and Bents EB2p_DL DeckConstHard 0.0000 0.0000 2.9890 0.0000 0.0000 0.0000 Pier Cap and Bents SIPG3Sp1e DeckConst 0.0000 0.0000 0.0632 0.0000 0.0000 0.0000 Girder SIPG3Sp2e DeckConst 0.0000 0.0000 0.0375 0.0000 0.0000 0.0000 Girder SIPG3Sp3e DeckConst 0.0000 0.0000 0.0619 0.0000 0.0000 0.0000 Girder |
0 Comments