This part is to inform about the general purposes of section definitions.
Please follow the instructions provided below to set section definitions to be used in this bridge example.
| 1 | Navigate to Properties > Sections |  |
| 2 | To import a section, click on the three-dot icon located on the first cell of the Name and select "Import Section". | |
| 3 | Select OpenBrIM Bridge Objects > Precast I Girder Sections > FDOT I BEAMS > FIB36 Assign Material as: Fc_8_1/2ksi Select OpenBrIM Bridge Objects > Precast I Girder Sections > FDOT I BEAMS > AASHTO_TYPE_III_BEAM Assign Material as: Fc_6ksi OpenBrIM Bridge Objects > AISC Steel Shape Database > HP Type > AISCHP 14X89 Assign Material as: A709_50W OpenBrIM Bridge Objects > AISC Steel Shape Database > HP Type > AISCHP 14X89 Assign Material as: A709_50W OpenBrIM Bridge Objects > AISC Steel Shape Database > HP Type > AISCHP 18X135 Assign Material as: A709_50W OpenBrIM Bridge Objects > AISC Steel Shape Database > HP Type > AISCHSS8X4X.375 Assign Material as: A500_B |  |
| 4 |  | |
| 5 |  | |
| 6 | Select OpenBrIM Bridge Objects > Basic Sections > Basic Shapes > Circle |   |
| 7 | Enter Radius as 18 in import section editor. | |
| 8 | Click Import | |
| 9 | Assign Material as Fc_4ksi (If the material Fc_4ksi is already assigned by default, there is no need to assign it again) | |
| 10 | Rename this section as Circle_exist_shaft_EB | |
| 11 | Repeat the same steps from 6 to 10 for the other basic section.
Rename this section as Circle_exist_shaft_Pier Assign Material as Fc_4ksi |  |
| 12 | Repeat the same steps from 6 to 10 for the other basic section.
Rename this section as Circle_exist_column Assign Material as Fc_5_1/2ksi |  |
| 13 | Repeat the same steps from 6 to 10 for the other basic section.
Rename this section as Circle_prop_column Assign Material as Fc_5_1/2ksi |  |
| 14 | Repeat the same steps from 6 to 10 for the other basic section. Enter Witdh and Depth
Rename this section as Rectangle_exist_EBcap Assign Material as Fc_5_1/2ksi |  |
| 15 | Repeat the same steps from 6 to 10 for the other basic section. Enter Witdh and Depth
Rename this section as Rectangle_prop_EB1cap Assign Material as Fc_5_1/2ksi |  |
| 16 | Repeat the same steps from 6 to 10 for the other basic section. Enter Witdh and Depth
Rename this section as Rectangle_prop_EB4cap Assign Material as Fc_5_1/2ksi |  |
| 17 | Repeat the same steps from 6 to 10 for the other basic section. Enter Witdh and Depth
Rename this section as PierCap_prop Assign Material as Fc_5_1/2ksi |  |
| 18 | ||
| 19 | ||
| 20 |
0 Comments