Access Steel I-Girder Training Example
Please follow below instructions in order to access ‘Steel I-Girder Training Example’
1 | → Log in to your account and locate the 'Project' option in the top right corner. → Click on 'Project' and then select 'NEW' from the top left corner of the screen. |   |
2 | → Under the 'Example Project' section, click on 'New Project' specifically located within the 'Steel I-Girder Training Example'. |   |
3 | → Provide a name for your project and proceed to open the example project. |   |
View FE Results of Steel I-Girder Training Example
Please follow the instructions provided below to view steel I-girder FEA results.
| 1 | Please ensure that the 'FEM' button located in the top-middle of the screen is active. If the button is inactive, the 'Analysis' button will not appear. → Once the 'Analysis' button appears in the top left corner, it indicates that the FE model has been compiled and is ready for analysis. |  |
| 2 | → To view the generated FE model, click on the ">" button to reveal an additional button panel. |  |
| 3 | → From the revealed button panel, click on the "FEA" button to access and view the FE model. |  |
| 4 | → Click on the “Analyze” button to initiate the finite element analysis (FEA) of the steel I-girder bridge. |  |
| 5 | Please note that the analysis for this project typically takes around 1.5 minutes to complete. | |
| 6 | → To hide the button panel again, you can click on the "<" button. Once hidden, you can explore the options provided by the drop-down menu located on the lower-left side of the screen. |  |
The common steps before investigating FE results have been completed.
Now, hover over and click on your favorite FE output from the available options below to delve deeper into the process of interacting with it:
0 Comments