Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 12 Next »

1

Click New from the left sidebar.

2

Click Empty Projects template.

3

Click FEA Workflow to create a new project.

4

Enter the project name and the category.

5

Follow the workflow to enter data.

6

Enter X, Y and Z as 0.

7

Click on the icon above the analysis icon from the left sidebar.

8

Click the FEA icon.

9

Go to Geometry > Nodes

10

Click on the DOF tab.

11

Click on the three-dots icon next to Tx, Ty, Tz, Rx, Ry, and Rz.

12

Set the values for Tx, Ty, Tz, Rx, Ry, and Rz.

13

Go to Geometry > Lines

14

Click on the three-dots icon on Node 1 and select a node.

15

Set the other node in the same way to create a line.

16

Repeat the same to create other lines.

17

Click on the three-dots icon next to Name and select Break.

18

Set the number of segments along local X.

19

Repeat the same process for the other lines.

20

Go to Properties > Materials

21

Click on the three-dots icon next to Name and select Import Material.

22

Go to Properties > Sections

23

Click on the three-dots icon next to Name and select Import Section.

24

Click on the three-dots icon next to Material and select a material.

25

Go to Geometry > Lines

26

Click on the three-dots icon next to Section at Start and select a section.

27

Repeat the same process for the other lines.

28

Click on the settings icon in the left sidebar and then select Display Section View.

29

The properties of the line object can be changed from other tabs.

30

31

32

33

34

Go to Loads> Static Loads> Nodal Loads

35

Click on the three-dots icon next to Node and select a node.

36

Click on the three-dots icon next to Load Case and create a load case.

37

38

39

40

41

42

43

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.