C n

Column Design Line Data

The "Design State" spreadsheet cell indicates the current status of the column design. Depending on whether the vertical or stirrup rebars have been assigned from the Columns section geometric data, the design state will be reflected accordingly.

Design State: “No Reinforcement”: If either the vertical or stirrup rebars are not assigned, the design state will be marked as "No Reinforcement". This indicates that the column design line is not yet ready for code check, as the necessary reinforcement information is missing.

Design State: “Need Verification”: On the other hand, if all the rebar assignments have been completed, the design state will be shown as "Need Verification". This signifies that the column design line is prepared for further verification and code check procedures.

The spreadsheet cell labeled "Changes After Last Code Check" provides information on the modifications made to the model following the completion of a code check. It displays the updates or revisions implemented as a result of the code check analysis.

The spreadsheet cell named "Code Check Timestamp" records the time at which the last code check was conducted. It serves as a reference to indicate the specific moment when the code check analysis was performed on the model.

These two cells, "Changes After Last Code Check" and "Code Check Timestamp," offer valuable insights into the code check process, allowing users to track and review the alterations made to the model and refer to the timestamp for the most recent code check operation.