Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 3 Current »

Please follow the instructions provided below to see the Analysis Results

Table 1: Column Analysis Results

1

Navigate 'Column Results' under 'Analysis Results' from the tree view.
Click on 'Select Results to View' button. To view the ETABS analysis results, make the appropriate selections from the options presented in the combobox, as shown in the figure."

2

In the Envelope Force option, you can select either preferred force or moment. To proceed, choose Fx as the envelope force.

3

By clicking the 'Show min/max' button, the maximum or minimum envelope force or moment will be displayed.

4

Set the load case to "LL wR".

To view the reduced value for LL, click the button labeled "Showing w/o LL Reduction" for the corresponding story and column.

The “Analysis Results” part is completed in this step.

You can proceed to the “Column Design” section.

  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.