Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 3 Current »

Please follow the instructions provided below to create girder line layouts.

1

Navigate to Bridge Geometry > Girder Layout

2

To select the insertion points for define Girder Layout , click on the three-dot icon located on the first cell of the Supports and pick IP1, IP3, IP5, and IP7.

3

Click Done after the selection of the insertion points.

And then to define another Girder Layout, select insertion points IP2, IP4, IP6, and IP8.

4

Set Type as curved.

Follow the below steps to copy and paste all inputs from our data set.

1

Navigate to Girder Layout under Bridge Geometry.

2

Copy Layout from model inputs and paste into OpenBrIM.

Girder layout is given below.

 Quick Tip: Copy inputs to OpenBrIM

Copy the desired data with the automatic copy button in the upper left corner.

Click on the first cell in and use the Ctrl+V shortcut to paste.

If icon won’t appear, collapse page tree menu by clicking on arrow or using shortcut “[”.

While pasting large data, it would be handy to turn of Auto-refresh .

Girder Layout

1

Layout

2
GL1	[IP1,IP3,IP5,IP7]	Curved	0	0
GL2	[IP2,IP4,IP6,IP8]	Curved	0	0
  • No labels

0 Comments

You are not logged in. Any changes you make will be marked as anonymous. You may want to Log In if you already have an account.