Please follow the instructions provided below to create Pile Capacity check.
| 1 | To control the capacity of the Piles in this section, select the appropriate Pile Cap for the corresponding pile" | |
| 2 | Navigate to Substructure Code Checks > Pile Capacity Check |  |
| 3 | Click three-dots icon on Pile Cap and click pick. | |
| 4 | In the 3D view, have selected RF1 as the Pile Cap. |  |
| 5 | Click three-dots icon on Template. Select the PCCT2 "Pile Capacity Check" template defined in the previous steps. |  |
Follow the below steps to copy and paste all inputs from our data set.
| 1 | Navigate to Pile Capacity Check under Superstructure Code Checks on the tree view. |
| 2 | Copy Params from model inputs and paste into OpenBrIM. |
The Pile Capacity Check have been created.
Copy the desired data with the automatic copy button in the upper left corner. Click on the first cell in and use the Ctrl+V shortcut to paste.  
If icon won’t appear, collapse page tree menu by clicking on arrow or using shortcut “[”.  While pasting large data, it would be handy to turn of Auto-refresh . 
|
Pile Capacity Check |
|---|
Params |
PCC4 PCCT2 RF1 |
0 Comments