Please follow the instructions provided below to define construction of substructure bridge components.
| 1 | Navigate to Loading > Construction > Substructre > Pier Cap/End Bent (Complete) |  |
| 2 | Click three-dots icon on Stage cell and click select. | |
| 3 | Select "SubstrConstStage" as stage. |  |
| 4 | Click three-dots icon on Pier Caps cell and click pick. |  |
| 5 | Select all of the Pier Caps that were previously defined from the 3D View. | Figure will be added  |
| 6 | Then click Done. |
Follow the below steps to copy and paste all inputs from our data set.
| 1 | Go to Pier Cap/End Bent (Complete) under Substructure on the tree view. |
| 2 | Copy Pier Cap Construction from model inputs and paste into OpenBrIM. |
Copy the desired data with the automatic copy button in the upper left corner. Click on the first cell in and use the Ctrl+V shortcut to paste.  
If icon won’t appear, collapse page tree menu by clicking on arrow or using shortcut “[”.  While pasting large data, it would be handy to turn of Auto-refresh . 
|
Pier Cap/End Bent (Complete) |
|---|
Pier Cap Construction |
PCC1 SubstrConstStage [PC1,PC2] 1 |
0 Comments