Please follow the instructions provided below to create Internal Cross Frame code check
| 1 | Navigate Templates for Code Check > Internal Cross Frame Code Check |  |
| 2 | For Internal Cross Frame code check, 1 Load Combination Tables must be defined. | |
| 3 | Click three-dots icon on Load Combination Table and set SuperstructureLCT. Since the Internal Cross Frame is a superstructure element, the appropriate Load Combination Table to assign would be "SuperstructureLCT". |  |
| 4 | Navigate to Bridge Parameters tab. |  |
| 5 | Enter data as follows: |
Follow the below steps to copy and paste all inputs from our data set.
| 1 | Navigate to Internal Cross Frame Code Check under Superstructure Code Checks on the tree view. |
| 2 | Copy Params and Design Parameters from model inputs and paste into OpenBrIM. |
The Internal Cross Frame Code Check have been created.
Copy the desired data with the automatic copy button in the upper left corner. Click on the first cell in and use the Ctrl+V shortcut to paste.  
If icon won’t appear, collapse page tree menu by clicking on arrow or using shortcut “[”.  While pasting large data, it would be handy to turn of Auto-refresh . 
|
Internal Cross Frame Code Check | |
|---|---|
Params | Bridge Parameters |
CFCCT1 SuperstructureLCT | CFCCT1 1000 2 |
0 Comments