Analysis Steps

Analysis Setting

1	Go to Analysis. Under the AEC\|BOLT tab, go to the Tributary section. Click on Run Tributary Analysis. Analysis was done.	Verifies Tributary Analysis
2	If you have a Live Load Reduction load, "LLR" should appear in the 1st column.	Verifies Live Load Reduction load template imported
3	Set "Do not Consider cut out if area is bigger 100 (ft²) rule" to "80". And make sure the value in the box	Verifies "Do not Consider cut out if area is bigger 100 (ft²) rule" can be changed
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19