OpenBrIM uses roadway data while performing influence surface based live load analysis.
Follow the next steps to add roadway to the project.
| 1 | Go to Roadway on the tree view. | -20221008-084526.png?version=1&modificationDate=1665218730056&cacheVersion=1&api=v2) |
| 2 | Select Bridge. | |
| 3 | Click three-dots icon on Roadway Dimensions and click Edit. | -20221008-084720.png?version=2&modificationDate=1665218848036&cacheVersion=1&api=v2)  |
| 4 | Enter start & end stations and left & right widths. | |
| 5 | Keep the lane dimensions and asphalt thickness on the Roadway tab as default. | -20221008-084922.png?version=1&modificationDate=1665218965715&cacheVersion=1&api=v2) |
| 6 | Follow the steps below to match the same inputs as illustrated model. | |
| 7 | Go to Roadway under Superstructure Attachments on the tree view. | |
| 8 | Copy General, and Roadway from model inputs and paste into OpenBrIM. | |
Completed Roadway is illustrated below.
Copy the desired data with the automatic copy button in the upper left corner.
Click on the first cell in and use the Ctrl+V shortcut to paste.
Roadway | ||
|---|---|---|
General R1 BR1 [[0, 0, 216, 216, 0],[6360, 0, 216, 216, 0]] | Roadway R1 12 20 0.75 2 | Roadway Dimensions(Spreadsheet) 0 0 18 18 0 530 0 18 18 0 |
0 Comments