Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 8 Next »

Custom pile cap templates are created from this section.

Figure 1

→ Click Pile Cap Edge button and draw the pile cap geometry under the columns or shear walls as demonstrated in Figure 2.

Figure 2

Figure 3

→ Select the concrete and rebar material of the custom pile cap and enter the properties such as cap depth, pile diameter etc. in spreadsheet as shown in Figure 3.

Figure 4

→ Click Show button to go to piles spreadsheet of custom pile cap as demonstrated in Figure 4.

Figure 5

→ Click Pile button as illustrated in Figure 5 to add piles to custom pile cap. Enter the center point of pile as shown in Figure 6.

Figure 6

→ Enter the properties such as capacities of each pile as demonstrated in Figure 7.

Figure 7

  • No labels