Foundation Walls

Foundation walls are defined from this section.

Figure 1

Click Foundation Wall button as shown in Figure 1.

Figure 2

Enter the floor number which the foundation wall will be drawn to AutoCAD command line as demonstrated in Figure 2.

Figure 3

Draw the foundation wall analytical line as illustrated in Figure 3.

Figure 4

Select the material of the foundation wall and enter the thickness of the foundation wall in the spreadsheet as shown in Figure 4.

Click No Break Pts button to add break points. Click to the point where break point to be added.

Once the foundation wall is divided into parts by break points, propeties of each part such as thickness or offset values can be entered differently. To enter different thickness or offset value to foundation wall parts enter “,” between each value as illustrated in Figure 5.

Figure 5