Analyzing for gravity loads and integration of lateral load design forces into BDS platform is achieved by exporting the mathematical model of the building to the well-accepted finite element analysis software ETABS.
Obtaining analysis results from ETABS for the building model created in BDS need satisfying the steps below:
Adding AEC|BOLT ETABS Plugin
Connecting to Building Platform Library to “Pull” the model into ETABS
Analyzing the model in ETABS
Connecting to Building Platform Library to “Push” the model into BDS
Adding AEC|BOLT ETABS Plugin:
Connecting to Building Platform Library to “Pull” the model into ETABS;
Figure X1
Go to Tools then click AEC | BOLT link to connect the Building Design Suite Library as shown in Figure X1.
Figure X2
Click YES to the pop up warning demonstrated in Figure X2.
A pop up window of AEC | BOLT Building Design Suite platform will open.
Figure X3
Log in with your AEC | BOLT Building Design Suite account as illustrated in Figure X3. After log in you will be directed to your library.
Figure X4
Click on the project which to be transferred to Etabs.
Figure X5
Click Finite View to see the analytical model of the building. The finite model generated by AEC | BOLT Building Design Suite will be transferred to etabs for analysis. You can easily re-generate the finite model if the generated model is not accurate for analysis (for example if not updated after the changes in 3D model). See FE Model page.
Add Comment