Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 10 Current »

After clicking on ‘Templates for Code Check and Load Rating> Pier Column Code Check' in the navigation treeview, follow the steps to define the Pier Column Code Check Template. You can use the collapsed documentation page below for more information on the explanations of each parameter.

 Pier Column Code Check Template
Concrete Pier Column Code Check T [SIG]
1

🖱️ Click on Name cell and set name as PierTemp.

image-20241005-095803.png

2

As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the load combination table is define in the next step.

3

 Quick Tip: Learn how to read issues

When encountering the warning as seen in OpenBrIM app, there is a "issue" , it is advised to review the parameters you have provided. This warning suggests that there might be a missing or incorrect parameter in your input. Check inputs to ensure they are accurate and complete.

When a warning is clicked, the reason can be displayed. The warning is expressed in the format of Component Group Name (can be viewed in the treeview) > User Defined Component Name (can be viewed in the spreadsheet name column) > Parameter Name (can be viewed in the spreadsheet column header).

After clicking on 'Superstructure > Connections > Bolted Field Splice' in the tree view, navigate to the Bolt category. Set the Bolt Property input. The issue will be resolved after these steps.

The screenshot demonstrates one example of two Bolted Field Splice components named BFS1 and BFS2 by the user, with parameter names Flange Bolt Property and Web Bolt Property.

4

🖱️ Click the three-dots icon on the Load Combination Table cell, and then set SubstructureLCT.

image-20241005-095900.png

5

🖱️ Keep the Select State Provisions and PS Load Case as default.

image-20241005-095954.png

6

image-20241005-100039.png Keep the Design Parameters and Section Analysis as default.

image-20241005-100107.pngimage-20241005-100120.png

7

Proceed to the next step to verify the model.

The completed pier column code check template is illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips.

image-20241005-100209.pngimage-20241005-100240.pngimage-20241005-100314.png

To view the entire procedure explained on this page, please watch the recorded Video below.

EX1 SIG Pier Column Code Check Templ.mp4

  • No labels