Pier Cap Point Load [SIG]

Pier Cap Load

Pier Cap: Choose the pier cap to impose the nodal load.

Stage: Select a stage to apply the load.

Distance From Right (relative): The relative distance where the load is applied.

Fx: Force in X direction. The longitudinal direction along the alignment will correspond to the X direction.

Fy: Force in Y direction. The transverse direction along the alignment will correspond to the X direction.

Fz (Gravity): Force in Z direction. A positive value will apply the load in the gravity direction, while a negative value will apply the load in the opposite direction.

Mx : Moment in the longitudinal direction along the PGL.

My : Moment in the direction perpendicular to the PGL.

Mz : Moment in the vertical direction.