End Diaphragm
Diaphragm Location[Start/End]: End diaphragms can be defined at the end or start of the girder.
Connected Girders: Select all the girders for which an end diaphragm is defined.
Depth: Total vertical depth.
Additional Overhang Length Transverse Direction Left- Right: Additional transverse distance from the girder's exterior web centerline. You can determine the right and left directions by looking up-station
Thickness (Downstation w.r.t Support Line): The thickness (Downstation) of the end diaphragm measured from Support Line where girders are connected.
Thickness (Upstation w.r.t Support Line): The thickness (Upstation) of the end diaphragm measured from Support Line where girders are connected.
User can define skew values for end diaphragms. However, if the defined Support Line is at the start of the girder unit or at the end of the girder unit, Start Skew or End Skew values are automatically assigned to the Support Line’s skew value, respectively.
Material: Set the material for the end diaphragm.
Add Comment