Lane Position

After clicking on ‘Loading> Loads> Wind Load> Wind Load on Live Load> Lane Position' in the navigation treeview, follow the steps to define the Lane Position. You can use the collapsed documentation page below for more information on the explanations of each parameter.

Lane Position

Lane Position [SIG]

1

Click the three-dots icon on the Bridge cell, and then set LS1.

2

Keep the Start Station as default.

3

Enter the End Station as 530.

4

Enter the Transverse Offset as -11.

5

Quick Tip: Transverse Offset Offset values use PGL as the reference point.

6

To model all the lane position, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model.

Quick Tip: Learn how to Copy inputs to OpenBrIM Copy the desired data with the automatic copy button in the upper left corner. Click on the first cell in and use the Ctrl+V shortcut to paste. If icon won’t appear, collapse page tree menu by clicking on arrow or using shortcut “[”. While pasting large data, it would be handy to turn of Auto-refresh .

Lane Position
Geometry LP1 BRG1 0.0000 530.0000 -11.0000 LP2 BRG1 0.0000 530.0000 0.0000 LP3 BRG1 0.0000 530.0000 11.0000

The completed lane load are illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips.

To view the entire procedure explained on this page, please watch the recorded Video below.