Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 55 Next »

Follow the next steps to add the pier cap.

1

Go to Pier Cap under Pier on the tree view.

2

Click three-dots icon on the Location cell and select a support line.

3

Click three-dots icon on the Straight-Tapered Section / Length cell and click Edit.

4

Enter Section Length along Y-Y starting from right.

5

Select Start Section and End Section.

6

Go back to pier cap, select Slope Option as alignment.

7

Edit Top Elevation Offset from Alignment, Transverse Offset, Longitudinal Offset and Section Type value.

8

Go to FEM tab and select a section for Rigid Section.

9

Go to Longitudinal Reinforcement tab and edit Reinforcement Data.

 Quick Tip: Transverse Offset Direction

Offset values use PGL as the reference point.

Follow the below steps to copy and paste all inputs from our data set.

1

Go to Pier Cap under Pier on the tree view.

2

Copy End Bent from model inputs and paste into OpenBrIM.

3

Go to FEM under Pier on the tree view.

4

Copy FEM data from model inputs and paste into OpenBrIM.

     Completed pier cap is illustrated below.

 Quick Tip: Copy inputs to OpenBrIM

Copy the desired data with the automatic copy button in the upper left corner.

Click on the first cell in and use the Ctrl+V shortcut to paste.

If icon won’t appear, collapse page tree menu by clicking on arrow or using shortcut “[”.

While pasting large data, it would be handy to turn of Auto-refresh .

Pier Cap

Section Data

Pier Cap

PierCap1	Pier2	Prismatic	[[72, PierCapRec_Taper, PierCapRec_Mid],[438, PierCapRec_Mid, PierCapRec_Mid],[72, PierCapRec_Mid, PierCapRec_Taper]]	PierCapRec_Mid	40	Alignment	0.2	-10	0
PierCap2	Pier3	Prismatic	[[72, PierCapRec_Taper, PierCapRec_Mid],[438, PierCapRec_Mid, PierCapRec_Mid],[72, PierCapRec_Mid, PierCapRec_Taper]]	PierCapRec_Mid	40	Alignment	0.2	-10	0

FEM

PierCap1	Yes	RigidSection	[0]
PierCap2	Yes	RigidSection	[0]

Section Data

6	PierCapRec_Taper	PierCapRec_Mid
36.5	PierCapRec_Mid	PierCapRec_Mid
6	PierCapRec_Mid	PierCapRec_Taper

  • No labels