Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 5 Next »

Internal Diaphragm

Support Line: Select the support line where the end diaphragm is constructed.

Girder: Choose the girder on which the end diaphragm is constructed.

Thickness [in]: Enter the thickness value used to calculate the weight of the end diaphragm.

User can define skew values for end diaphragms. However, if the defined Support Line is at the start of the girder unit or at the end of the girder unit, Start Skew [deg] or End Skew [deg] values are automatically assigned to the Support Line’s skew value, respectively.

Start Skew [deg]: Skew value of the end diaphragm at the downstation.

End Skew [deg]: Skew value of the end diaphragm at the upstation.

Material: Set the material for the end diaphragm. It is possible to consider the weight of the end diaphragm and apply it as loads in stage construction analysis.

  • No labels