Skip to end of metadata
Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

« Previous Version 3 Next »

Access Steel I-Girder Training Example

Please follow below instructions in order to access ‘Steel I-Girder Training Example’

1

→ Log in to your account and locate the 'Project' option in the top right corner.

→ Click on 'Project' and then select 'NEW' from the top left corner of the screen.

2

→ Under the 'Example Project' section, click on 'New Project' specifically located within the 'Steel I-Girder Training Example'.

3

→ Provide a name for your project and proceed to open the example project.

View FE Results of Steel I-Girder Training Example

Please follow the instructions provided below to view steel I-girder FEA results.

1

Please ensure that the 'FEM' button located in the top-middle of the screen is active. If the button is inactive, the 'Analysis' button will not appear.

→ Once the 'Analysis' button appears in the top left corner, it indicates that the FE model has been compiled and is ready for analysis.

2

→ To view the generated FE model, click on the ">" button to reveal an additional button panel.

3

→ From the revealed button panel, click on the "FEA" button to access and view the FE model.

4

→ Click on the “Analyze” button to initiate the finite element analysis (FEA) of the steel I-girder bridge.

5

Please note that the analysis for this project typically takes around 1.5 minutes to complete.

  • No labels