1

Example model to experience the steps from 1 to 4

Example Model : https://openbrim.org/objidu3bpie4l0mjtmkj54bxb5.project?prj=objidu3bpie4l0mjtmkj54bxb5&active=GraphicsView

2

Go to the 'Plate Girder' object in the workflow.

3

Click on the 'Web Depth' input cell of the girder you want to change the web depth. Then, click on the three dots that appear on the right side of the cell. After that, click on 'Edit (Spreadsheet)'.

4

• In the newly opened spreadsheet, we can define the 'Web Depth' parameter as station dependent.

• After the definition is done, press the 'Back' button to apply the changes to the project.

• You can also define other parameters of the girder as station dependent.

1

Example model to experience the steps from 1 to 4

Example Model : https://openbrim.org/platform/?application=app&prj=objida5tdt4qqgc9xvelekk7x&active=GraphicsView

2

Click on the 'Support Line' object in the workflow to set the skew angle.

3

When the skew angle value of 'Abut 1' is zero, it appears like this.

4

When the skew angle of 'Abut 1' changes, it appears like this.

As seen, the cross-frames are not aligned according to the support line.

5

• To align the skew angle of the cross-frame with the support line, click on the three dots to the right of the skew angle input cell of the support line.

• Then, click on 'Copy Parameter'. Now, the value of the skew angle has been copied parametrically.

• The parameter we copied exactly is: Abut1.s_skew