OpenBrIM.FEA [QG-10]

1	Click New from the left sidebar.
2	Click Empty Projects template.
3	Click FEA Workflow to create a new project.
4	Enter the project name and the category.
5	Follow the workflow to enter data.
6	Enter X, Y and Z as 0.
7	Click on the icon above the analysis icon from the left sidebar.
8	Click the FEA icon.
9	Create additional nodes, namely N2, N3, and N4, with parameters X set to 300, 660, and 960, respectively.
10	Go to Geometry > Lines
11	Click on the three-dots icon on Node 1 and select a node.
12	Set the other node in the same way to create a line.
13	Repeat the same to create other lines.
14	Click on the three-dots icon next to Name and select Break.
15	Set the number of segments along local X.
16	Repeat the same process for the other lines.
17	Go to Properties > Materials
18	Click on the three-dots icon next to Name and select Import Material.
19	Go to Properties > Sections
20	Click on the three-dots icon next to Name and select Import Section.
21	Click on the three-dots icon next to Material and select a material.
22	Go to Geometry > Lines
23	Click on the three-dots icon next to Section at Start and select a section.
24	Repeat the same process for the other lines.
25	Click on the settings icon in the left sidebar and then select Display Section View.