OpenBrIM.FEA [QG-10]

1	Click New from the left sidebar.
2	Click Empty Projects template.
3	Click FEA Workflow to create a new project.
4	Enter the project name and the category.
5	Follow the workflow to enter data.
6	Enter X, Y and Z as 0.
7	Click on the icon above the analysis icon from the left sidebar.
8	Click the FEA icon.
9	Go to Geometry > Nodes
10	Click on the DOF tab.
11	Click on the three-dots icon next to Tx, Ty, Tz, Rx, Ry, and Rz.
12	Set the values for Tx, Ty, Tz, Rx, Ry, and Rz.
13	Go to Geometry > Lines
14	Click on the three-dots icon on Node 1 and select a node.
15	Set the other node in the same way to create a line.
16	Click on the three-dots icon next to Name and select Break.
17	Set the number of segments along local X.
18	Go to Properties > Materials
19	Click on the three-dots icon next to Name and select Import Material.
20	Go to Properties > Sections
21	Click on the three-dots icon next to Name and select Import Section.
22	Go to Geometry > Lines
23	Click on the three-dots icon next to Section at Start and select a section.
24	Go to Loads> Static Loads> Nodal Loads
25	Click on the three-dots icon next to Node and select a node.
26	Click on the three-dots icon next to Load Case and select a load case.
27	Enter Fz as -5.
28	Click on the model text under the settings icon in the left sidebar.
29	Select the Loading text.
30
31
32
33