Skip to end of banner Go to start of banner

*Support Lines

Skip to end of metadata

Created by mert.goktas , last modified on Feb 16, 2023

Go to start of metadata

You are viewing an old version of this content. View the current version.

Compare with Current View Version History

Please follow the instructions provided below to define the reference support lines where the piers will be located.

1	Navigate to Bridge Geometry > Support Lines
2	To create the support line at Station 0 for the Bridge, click on the three-dot icon located on the first cell of the Bridge and set it to "BRG1".
3	Repeat the same process to create the other support lines at their respective stations. Set the support line for Pier2 at Station 160, for Pier3 at Station 360, and for Abut4 at Station 520.

Quick Tip

Offset values use PGL as the reference poin

Follow the below steps to copy and paste all inputs from our data set.

Navigate to Support Lines under Bridge Geometry.

Copy Bridge Parameters from model inputs and paste into OpenBrIM.

Completed Support Lines are illustrated below.

Quick Tip: Copy inputs to OpenBrIM

Copy the desired data with the automatic copy button in the upper left corner.

Click on the first cell in and use the Ctrl+V shortcut to paste.

If icon won’t appear, collapse page tree menu by clicking on arrow or using shortcut “[”.

While pasting large data, it would be handy to turn of Auto-refresh .

Support Lines
Bridge Parameters
Abut1 BRG1 0 0 0 Pier2 BRG1 160 0 0 Pier3 BRG1 360 0 0 Abut4 BRG1 520 0 0

No labels