Deck

Follow the next steps to define deck cross-sections.

1	You need to define at least 2 deck cross-sections along the deck.
2	Pick 1^stand 2^nd Support Lines with no longitudinal offsets.
3	Go to Deck Cross Section tab.
4	Pick the Girders for haunch locations.
5	Enter the deck dimensions.

Follow the below steps to copy and paste all inputs from our data set.

1	Go to Cross-Section under Deck on the tree view.
2	Copy Location, Deck Cross Section from model inputs and paste into OpenBrIM.

Completed deck cross section is illustrated below.

Follow the next steps to define concrete deck.

1	Go to Concrete Deck on tree view.
2	Pick Cross-sections graphically.
3	Import deck Material and assign it.
4	Quick Tip You can view the previously imported materials in Properties->Materials on the tree view.

Follow the below steps to copy and paste all inputs from our data set.

1	Go to Concrete Deck under Deck on the tree view.
2	Copy General from model inputs and paste into OpenBrIM.

Completed deck cross section is illustrated below.

Quick Tip: Copy inputs to OpenBrIM

Copy the desired data with the automatic copy button in the upper left corner.

Click on the first cell in and use the Ctrl+V shortcut to paste.

If icon won’t appear, collapse page tree menu by clicking on arrow or using shortcut “[”.

While pasting large data, it would be handy to turn of Auto-refresh .

Deck Cross-Section

Concrete Deck

Location

DCS1	Abut1	0
DCS2	Abut4	0

Deck Cross Section

DCS1	[G1,G2,G3,G4]	486	45	9	9	9
DCS2	[G1,G2,G3,G4]	486	45	9	9	9

General

Deck1	[DCS1,DCS2]	FcCube_4ksi