...
This library component is developed for OBP worfklow but is not a workflow item. The aim of this object is to tabulate the analysis results systematically and to show transparently which factored result was calculated using which factors and unfactored results.
The Load Combination Document object do not calculate any of the results that are tabulated in the report. All the cases ,enumerations ,factors and results of each limit state combination is an input for the object. And the report tabulates the results only for 1 station or element. If there is a station list or element list, this object must be called in the “Repeat”.
The developer must extends this object to base (2nd layer) object and set the parameters accordingly. (See referencing guide objects ***). Then each DocSection or DocTable of this library component can be referred using “DocRef” in the document of base object.
...
How to use OBPBase_FECompositeForceExtraction & OBPDoc_LoadCombination
Base object representative : https://openbrim.org/app/?incubator=1&author=Harika_Inanc_&obj=objidjil10cnrlrdhm73dgq7me6
...
Input-mapping object representative : https://openbrim.org/app/?incubator=1&author=Harika_Inanc_&obj=objid4wjpvtluomdfacm7244sqj
These objects are representing the relationship between OBPBase_FECompositeForceExtraction in map object & OBPDoc_LoadCombination in base object. This example shows how to set critical and concurrent for Fx result parameters for 1 station. The main idea is that force extraction object outputs are based on station list but the documentation inputs are based on one station only.