Versions Compared

Version Old Version 8 New Version Current
Changes made by

Melis Ceylan

Melis Ceylan

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

1

🖱️ Click three-dots on the first cell of the Girders and pick the girders G4G1, G3G2

2

🖱️ Keep the Skew Angle as default.

3

You can refer to the Quick Tip below to see how the Cross Frame behaves with a skew angle.

4

Insert excerpt
_Quick Tips
_Quick Tips
nameCrossFrameSkewAngle
nopaneltrue

5

🖱️Enter the Station as 20.

6

🖱️ Keep the Has middle gusset plate? as default.

7

You can edit the Section of cross frame from Sections tab.

🖱️ Click three-dots icon on Top Chord Section, Bottom Chord Section and Diagonal Chord Section cells and select a Section as AISCL8X8X3_4.

If you have reached this stage and you don't have a section to select, and if you want to use the Import Button, you can refer to the Quick Tip.

Keep Top Chord Orientation Angle, Bottom Chord Orientation Angle, Diagonal Chord Orientation Angle as default.

image-20240928-151255.pngimage-20240928-151335.png

8

Insert excerpt
_Quick Tips
_Quick Tips
nameImportSection
nopaneltrue

9

You can edit the gusset plate of cross frame from Gusset Plate tab.

🖱️ Click three-dots icon on Top Gusset Plate cell and select a Gusset Plate as GSX_TOP.

🖱️ Click three-dots icon on Bottom Gusset Plate cell and select a Gusset Plate as GSX_BOTTOM.

🖱️ Click three-dots icon on Center Gusset Plate cell and select a Gusset Plate as GSX_CENTER.

image-20240928-151432.png

image-20240928-151522.png

10

🖱️Enter the Offset from Top of Web as 6.

image-20240928-151541.png

11

🖱️Enter the Offset from Bot. of Web as 5.

image-20240928-151652.png

12

🖱️Enter the Horizontal Dist. btw Web Centerline and Plate Edge as 1.

image-20240928-151712.png

13

You can edit the stiffener of cross frame from Stiffener tab.

image-20240928-151135.png Keep Stiffener Used parameter as default.

🖱️ Keep the Vertical Stiffener Thickness as default.

🖱️Enter the Vertical Stiffener Width as 7.

image-20240928-151749.png

14

🖱️ Click the three-dots icon on the Material cell, and then select A709_50.

 

If you have reached this stage and you don't have a material to select, and if you want to use the Import Button, you can refer to the Quick Tip.

image-20240928-151909.png

image-20240928-151834.png

15

Insert excerpt
_Quick Tips
_Quick Tips
nameImportMaterial
nopaneltrue

16

🖱️ Keep the Geometry and FEA tabs parameters as default.

17

When the steps are completed, the shared screenshot displayed in the adjacent cell should be visible in the 3D view of OpenBrIM.

18

To model all the cross frame, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model.

...

Cross Frame X

Location

Code Block
CFX1	[G4G1,G3G2]	0.0000	20.0000	YES
CFX2	[G4G1,G3G2]	0.0000	40.0000	YES
CFX3	[G4G1,G3G2]	0.0000	60.0000	YES
CFX4	[G4G1,G3G2]	0.0000	80.0000	YES
CFX5	[G4G1,G3G2]	0.0000	120.0000	YES
CFX6	[G4G1,G3G2]	0.0000	140.0000	YES
CFX7	[G4G1,G3G2]	0.0000	160.0000	YES
CFX8	[G4G1,G3G2]	0.0000	180.0000	YES
CFX9	[G4G1,G3G2]	0.0000	199.0900	YES
CFX10	[G4G1,G3G2]	0.0000	218.1800	YES
CFX11	[G4G1,G3G2]	0.0000	237.2700	YES
CFX12	[G4G1,G3G2]	0.0000	256.3600	YES
CFX13	[G4G1,G3G2]	0.0000	275.4500	YES
CFX14	[G4G1,G3G2]	0.0000	294.5400	YES
CFX15	[G4G1,G3G2]	0.0000	313.6300	YES
CFX16	[G4G1,G3G2]	0.0000	332.7200	YES
CFX17	[G4G1,G3G2]	0.0000	351.8100	YES
CFX18	[G4G1,G3G2]	0.0000	370.0000	YES
CFX19	[G4G1,G3G2]	0.0000	390.0000	YES
CFX20	[G4G1,G3G2]	0.0000	410.0000	YES
CFX21	[G4G1,G3G2]	0.0000	430.0000	YES
CFX22	[G4G1,G3G2]	0.0000	450.0000	YES
CFX23	[G4G1,G3G2]	0.0000	470.0000	YES
CFX24	[G4G1,G3G2]	0.0000	490.0000	YES
CFX25	[G4G1,G3G2]	0.0000	510.0000	YES
CFX26	[G2,G3,G2]	0.0000	20.0000	YES
CFX27	[G2,G3,G2]	0.0000	40.0000	YES
CFX28	[G2,G3,G2]	0.0000	60.0000	YES
CFX29	[G2,G3,G2]	0.0000	80.0000	YES
CFX30	[G2,G3,G2]	0.0000	100.0000	YES
CFX31	[G2,G3,G2]	0.0000	120.0000	YES
CFX32	[G2,G3,G2]	0.0000	140.0000	YES
CFX33	[G2,G3,G2]	0.0000	160.0000	YES
CFX34	[G2,G3,G2]	0.0000	180.0000	YES
CFX35	[G2,G3,G2]	0.0000	199.0900	YES
CFX36	[G2,G3,G2]	0.0000	218.1800	YES
CFX37	[G2,G3,G2]	0.0000	237.2700	YES
CFX38	[G2,G3,G2]	0.0000	256.3600	YES
CFX39	[G2,G3,G2]	0.0000	275.4500	YES
CFX40	[G2,G3,G2]	0.0000	294.5400	YES
CFX41	[G2,G3,G2]	0.0000	313.6300	YES
CFX42	[G2,G3,G2]	0.0000	332.7200	YES
CFX43	[G2,G3,G2]	0.0000	351.8100	YES
CFX44	[G2,G3,G2]	0.0000	370.0000	YES
CFX45	[G2,G3,G2]	0.0000	390.0000	YES
CFX46	[G2,G3,G2]	0.0000	410.0000	YES
CFX47	[G2,G3,G2]	0.0000	430.0000	YES
CFX48	[G2,G3,G2]	0.0000	450.0000	YES
CFX49	[G2,G3,G2]	0.0000	470.0000	YES
CFX50	[G2,G3,G2]	0.0000	490.0000	YES
CFX51	[G2,G3,G2]	0.0000	510.0000	YES
CFX55_1	[G1G4,G2G3]	0.0000	20.0000	YES
CFX55_2	[G1G4,G2G3]	0.0000	40.0000	YES
CFX55_3	[G1G4,G2G3]	0.0000	60.0000	YES
CFX55_4	[G1G4,G2G3]	0.0000	80.0000	YES
CFX55_5	[G1G4,G2G3]	0.0000	100.0000	YES
CFX55_6	[G1G4,G2G3]	0.0000	120.0000	YES
CFX55_7	[G1G4,G2G3]	0.0000	140.0000	YES
CFX55_8	[G1G4,G2G3]	0.0000	160.0000	YES
CFX55_9	[G1G4,G2G3]	0.0000	180.0000	YES
CFX55_10	[G1G4,G2G3]	0.0000	199.0900	YES
CFX55_11	[G1G4,G2G3]	0.0000	218.1800	YES
CFX55_12	[G1G4,G2G3]	0.0000	237.2700	YES
CFX55_13	[G1G4,G2G3]	0.0000	256.3600	YES
CFX55_14	[G1G4,G2G3]	0.0000	275.4500	YES
CFX55_15	[G1G4,G2G3]	0.0000	294.5400	YES
CFX55_16	[G1G4,G2G3]	0.0000	313.6300	YES
CFX55_17	[G1G4,G2G3]	0.0000	332.7200	YES
CFX55_18	[G1G4,G2G3]	0.0000	351.8100	YES
CFX55_19	[G1G4,G2G3]	0.0000	370.0000	YES
CFX55_20	[G1G4,G2G3]	0.0000	390.0000	YES
CFX55_21	[G1G4,G2G3]	0.0000	410.0000	YES
CFX55_22	[G1G4,G2G3]	0.0000	430.0000	YES
CFX55_23	[G1G4,G2G3]	0.0000	450.0000	YES
CFX55_24	[G1G4,G2G3]	0.0000	470.0000	YES
CFX55_25	[G1G4,G2G3]	0.0000	490.0000	YES
CFX55_26	[G1G4,G2G3]	0.0000	510.0000	YES
CFX52	[G3G2,G4G1]	0.0000	100.0000	YES

Anchor
Photo
Photo

...

Tip

To view the entire procedure explained on this page, please watch the recorded Video below.

SIG EX1 X.mp4Image RemovedSIG EX1 CrossFRameX.mp4