...
...
...
| Info |
|---|
Follow the next steps to set rebar definitions to be used in this bridge example. |
...
Go to Properties > Rebars
...
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
After clicking on 'Properties> Rebars' in the navigation treeview, follow the steps to define the Rebar. You can use the collapsed documentation page below for more information on the explanations of each parameter. |
| Expand | ||
|---|---|---|
| ||
| Rebars [SIG] |
| 1 | 🖱️ Click the three-dots on the first cell of the Name and click Import Rebar Profile |
 | |
| 2 | 🖱️ Import designated rebars below:
|
|
| ||
| 3 | Proceed to the next step to verify the model. | |
| Anchor | ||||
|---|---|---|---|---|
|
| Tip |
|---|
Completed rebar definitions The completed rebars are illustrated below. |
...
Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips. |
...
| Tip |
|---|
To view the entire procedure explained on this page, please watch the recorded Video below. |
...