Bir güzergahta birden fazla T="crosssectionCrosssection" objesi tanımlanabilir. Yolun durumuna göre belli bir kilometreden sonra eğim değişikliği yapmak için başka enine kesitler tanımlanır. Station o kesitin başlama noktası, LeftEdgeToHCL o kesitin yarı genişliğini verir. T="crossSectionSegmentCrossSectionSegment" objesi altında Slope, enine kesitin eğimini, Width ise o kesitin genişliğini ifade eder. Yani yolun tüm genişliğini CrossSectionSegment altında parçalara ayırabilir farklı eğimler tanımlayabiliriz.
...
Şekilde görülen kesiti oluşturur.
Enine Kesit için Parametreler:
Label | Mandatory | Name and Type Attributes | Default Description and Value Attributes | Other Attributes | |
1 | Station | yes | N="Station" | D="Station: The longitudinal location of the cross-section along the alignment line." | Role="Input" |
2 | Left Edge to HCL | yes | N="LeftEdgeToHCL" | D="Left Edge to HCL: Transverse location of the left edge of the cross-section from the horizontal control line (from left-hand side looking up-station)." | Role="Input" |
Enine Kesit Segment Objesi için Parametreler:
Label | Mandatory | Name and Type Attributes | Default Description and Value Attributes | Other Attributes | |
1 | Slope | yes | N="Slope" | D="Eğim: The slope of the cross-section segment. Positive slope for inclination from left to right looking up-station on the alignment." | Role="Input" |
2 | Width | yes | N="Width" | D="Genişilk: The width of the cross-section segment along its slope." | Role="Input" |
...