| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Follow the next steps to create a cross frame code check. |
...
Go to Templates for Code Check and Load Rating/ Cross Frame Code Check.
...
Select Load Combination Table as SuperstructureLCT.
...
Name the row CFrameCCT.
| Tip |
|---|
| Info |
After clicking on ‘Templates for Code Check and Load Rating> Cross Frame Code Check' in the navigation treeview, follow the steps to define the Cross Frame Code Check Template. You can use the collapsed documentation page below for more information on the explanations of each parameter. |
| Expand | ||
|---|---|---|
| ||
| Cross Frame Code Check T [SIG] |
| 1 | 🖱️ Click on Name cell and set name as CFrameCCT. |
| ||||
| 2 | As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the load combination table is define in the next step. |  | ||||
| 3 |
| |||||
...
| |||||
...
| ||||
...
Cross Frame Code Check
Params
| Code Block |
|---|
CFrameCCT SuperstructureLCT NO |
Bridge Parameters
| |||||
Go to Cross Frame Code Check under Templates for Code Check and Load Rating on the tree view.
Copy General and Fatigue Parameters from model inputs and paste into OpenBrIM.
...
| 4 | 🖱️ Click the three-dots icon on the Load Combination Table cell, and then set SuperstructureLCT. |
|
| 5 | 🖱️Go to the Fatigue Parameters tab. Set ADTT to 1250 and Number of Lanes Available to Trucks to 3. Leave the rest of the parameters as default. |
|
| 6 |
|
|
| 7 | Proceed to the next step to verify the model. | |
| Anchor | ||||
|---|---|---|---|---|
|
| Tip |
|---|
The completed cross frame code check template is illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips. |
...
| Tip |
|---|
To view the entire procedure explained on this page, please watch the recorded Video below. |
...