| Info |
|---|
After clicking on 'Substructure> Foundation> Rectangular' in the navigation treeview, follow the steps to define the Rectangular Foundation. You can use the collapsed documentation page below for more information on the explanations of each parameter. |
| Expand | ||
|---|---|---|
| ||
| Rectangular Footing [SIG] |
| 1 |
|   | ||||||||||
| 2 |
|  | ||||||||||
| 3 |
|  | ||||||||||
| 4 |
|  | ||||||||||
| 5 |
If you want to examine the working logic of the Transverse Offset and Longitudinal Offset parameters in the Foundation object, you can refer to the Quick Tip below. |  | ||||||||||
| 6 |
| |||||||||||
| 7 |
If you have reached this stage and you don't have a material to select, and if you want to use the Import Button, you can refer to the Quick Tip. |    | ||||||||||
| 8 |
| |||||||||||
| 9 |
|  | ||||||||||
| 10 |
| 
| ||||||||||
| 11 |
| 
| ||||||||||
| 12 | When the steps are completed, the shared screenshot displayed in the adjacent cell should be visible in the 3D view of OpenBrIM. |  | ||||||||||
| 13 | To model all the rectangular foundation, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model. | |||||||||||
...
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
...
| Tip |
|---|
To view the entire procedure explained on this page, please watch the recorded Video below. |
...