Content Comparison

...

Code Block

language	xml

 ...
 ...

        <O T="DocSection" Title="3D Model ">
            <O T="DocText">
                <![CDATA[
            --md
                In this section of the document, a visual representation of the 3D object will be provided.
            ]]>
            </O>
            <O T="Doc3D" Width="600" Height="300">
                <P N="Obj3D" V="Vol" />
            </O>
        </O>
...
...

Header Size: The size of the header is determined by the number of hash symbols (#) used. One hash symbol (#) is used for the largest heading, while six hash symbols (######) are used for the smallest heading. The more hash symbols used, the smaller the header size will be.

...

Code Block

language	xml

<O N="DocumentObject2" T="Project" Category="Document Object" TransAlignRule="Right">
    <!-- created by ParamML Examples on 10.02.2023 -->
    <P N="d" V="15.21" />
    <O N="Doc 1" T="Document">
        <O T="DocText">
            <![CDATA[
            --md
             
            # OpenBrIM Markdown
            OpenBrIM `DocText` object supports GitHub compatible markdown content which can be directly rendered inside documents and design reports.
 
            Markdown content must start following `--md` keyword. The markdown content must follow the same indentation as this keyword.
 
            Here are some of the things that are supported:
             
            ## The second largest heading
             
            This is an H1
            =============
             
            This is an H2
            -------------
 
            *This text will be italic*
            **This text will be bold**
             
            ###### Material Type Lists:
            1. Steel
            2. Concrete
            3. Wooden
 
            ### Tables:
 
            | Column Type        | Location           | Material  |
            |: ------------- |:-------------:| -----:|
            | **Column 1**  | 1stFloor | Steel |
            |  Column 2 is      | *2ndFloor*    |   Concrete |
            | Column 3 |d|   s | ~~3rd Floor~~  |    Wooden |
             
            |d| "d" Parameters Shown |d|
 
            ## Task Lists
 
            - [x] checked list item
            - [ ] unchecked list item
 
            ## Code Blocks
            ```
            Steel = ASTM A615 Grade 60 Rebar
            Concrete strength = C30
            Wooden --> oak tree bending σ=75 kg/cm'2
            ```
 
            ## Emoji
 
            this is a :smile: smile emoji
 
            ## Images
         
            ![Logo](https://openbrim.org/www/brim/assets/img/logo.png"Logo Title Text 1")
        ]]>
        </O>
    </O>
</O>

To view this example in the library, see (https://openbrim.org/platform/?application=inc&author=ParamML_Examples_OpenBrIM+Platform&folder=Document+Object&obj=objidep9yv918v687pt0cj15xq9)

...

Code Block

language	xml

...
...
        <O T="DocSection" Title="3D Model ">
            <O T="DocText">
                <![CDATA[
            --md
                In this section of the document, a visual representation of the 3D object will be provided.
            ]]>
            </O>
            <O T="Doc3D" Width="600" Height="300">
                <P N="Obj3D" V="Vol" />
            </O>
        </O>
...
...

Image Added

Parameters of Doc3D Object:

	Label	Mandatory	Description	Example
1	Width	Yes	Width of the display in pixel.	Width="600"
2	Height	Yes	Height of the display in pixel.	Height="400"	Yes	Height of the display in pixel.	Height="400"

Label

Mandatory

Name Attribute

Value Attribute

Type Attribute

1

Obj3D

Yes

N="Obj3D"

Name of 3D object or group.

Example: V="Pier"

Type of 3D object (Surface, Circle, Volume, Line) or group.

Example: T="Volume"; T="Group"

4)DocCADD Object:

With this object, 2D drawings of the project or the desired object can be displayed in the document.

Example:

Code Block

language	xml

Parameters of DocCADD Object:

	Label	Mandatory	Description	Example
1	Width	Yes	Width of the display in pixel.	Width="600"
2	Height	Yes	Height of the display in pixel.	Height="400"

Label

Mandatory

Name Attribute

Value Attribute

Type Attribute

1

CADD

Yes

N="CADD"

Name of CADD objects or CADDFrom3D object .

Example: V="Elevation"

T="CADD"

5)DocCode Object:

This object serves to display the ParamML code in the document.

Example:

Code Block

language	xml

...
...
        <O T="DocSection" Title="ParamML Code ">
            <O T="DocCode" Width="300" Height="400">
                n="Vol" t="Volume" z="height" opacity="0.9">
                <o t="Point" x="-width/2" y="width/2">
                    <o t="Point" x="-width/2" y="-width/2">
                    </o>
                </o>
            </O>
        </O>
...
...

Image Added

6)DocGraph Object:

Using this object, linear graphics can be displayed in the document.

Example:

Code Block

language	xml

<O N="DocumentObject3" T="Project" Category="Document Object" TransAlignRule="Right">
    <!-- created by ParamML Examples on 10.02.2023 -->
    <O N="Documentation1" T="Document">
        <O T="DocSection" Title="Scatter Graph ">
            <O N="Scatter Graph" T="DocGraph" Width="400" Height="300" Title="Forces" DataList="[[[0,0],[1,3],[2,4],[3,4.5],[4,4.75],[5,4.75],[6,4.5]],[[0,20],[1,15],[2,4],[3,4.5],[4,4.75],[5,4.75],[6,4.5]]]" AxisLabelY="Force" AxisLabelX="Station" TitleList="['Girder1','Girder2']" UnitX="in" UnitY="kip" MinX="-5" MaxX="10" MinY="-5" MaxY="30" />
        </O>
        <O T="DocSection" Title="Line And Scatter Graph ">
            <O N="Scatter Graph" T="DocGraph" Width="400" Height="300" Title="Forces" DataList="[[[0,0],[1,3],[2,4],[3,4.5],[4,4.75],[5,4.75],[6,4.5]],[[0,20],[1,15],[2,4],[3,4.5],[4,4.75],[5,4.75],[6,4.5]]]" AxisLabelY="Force" AxisLabelX="Station" TitleList="['Girder1','Girder2']" UnitX="in" UnitY="kip" MinX="-5" MaxX="10" MinY="-5" MaxY="30" PointStyle="['dash','triangle']" DrawLine="[1,0]" />
        </O>
        <O T="DocSection" Title="Pie Chart">
            <O N="Pie Chart" T="DocPieChart" Width="400" Height="300" Title="Forces" DataSets="[[20,100,40]]" Labels="['Girder1','Girder2', 'Girder3']" />
        </O>
        <O T="DocSection" Title="Doughnut Chart">
            <O N="Pie Chart" T="DocPieChart" Width="400" Height="300" Title="Forces" DataSets="[[20,100,40],[20,100,800]]" Labels="['Girder1','Girder2', 'Girder3']" Doughnut="1" />
        </O>
        <O T="DocSection" Title="Horizontal Bar Chart">
            <O N="HorizontalBarChart" T="DocHorizontalBarChart" Width="400" Height="300" Title="Forces" DataSets="[[20,100],[20,100],[54,12],[20,100],[20,100]]" Labels="['Girder1','Girder2','Girder3','Girder4','Girder5' ]" DataSetLabels="['DC1','DC2']" />
        </O>
        <O T="DocSection" Title="Vertical Bar Chart">
            <O N="HorizontalBarChart" T="DocHorizontalBarChart" Width="400" Height="300" Title="Forces" DataSets="[[20,100],[20,100],[54,12],[20,100]]" DataSetLabels="['Girder1','Girder2']" Labels="['DC1','DC2','DW','LL']" Vertical="1" />
        </O>
    </O>
</O>

Image Added

To view this example in the library, see (https://openbrim.org/platform/?application=inc&author=ParamML_Examples_OpenBrIM+Platform&obj=objidlf5osn4pd1miedlk3b9on)

Parameters of DocGraph Object:

	Label	Mandatory	Description	Example
1	Title	Yes	Title indicated inside the graph.	Title="Graph 1"
2	Width	Yes	Width of the display in pixel.	Width="600"
3	Height	Yes	Height of the display in pixel.	Height="400"
4	AxisLabelX	Yes	Variable name along X-axis.	AxisLabelX="Width"
5	AxisLabelY	Yes	Variable name along Y-axis.	AxisLabelY="Height"
6	DataList	Yes	Data plotted along X-axis and Y-axis. V="[X value, Y value]"	DataList="[0,0],[8,16],[12,28] "

7)DocTable Object:

With this object, a table can be prepared and displayed in the document.

Example:

Code Block

language	xml

...
...
<O T="DocSection" Title="28 days Concrete strength ">
            <O T="DocTable">
                <O T="DocRow">
                    <O T="DocCell">
                        concrete grade
                    </O>
                    <O T="DocCell">
                        Typical Compressive Strength fck (MPa)
                    </O>
                    <O T="DocCell">
                        Typical Axial Tension Strength fctk (MPa)
                    </O>
                </O>
                <O T="DocRow">
                    <O T="DocCell">
                        C16/20
                    </O>
                    <O T="DocCell">
                        16
                    </O>
                    <O T="DocCell">
                        1.4
                    </O>
                </O>
                <O T="DocRow">
                    <O T="DocCell">
                        C18/22
                    </O>
                    <O T="DocCell">
                        18
                    </O>
                    <O T="DocCell">
                        1.5
                    </O>
                </O>
                <O T="DocRow">
                    <O T="DocCell">
                        C20/25
                    </O>
                    <O T="DocCell">
                        20
                    </O>
                    <O T="DocCell">
                        1.6
                    </O>
                </O>
            </O>
        </O>
...
...

Image Added

Example:

Code Block

language	xml

<O N="DocumentObject1" T="Project" Category="Document Object" TransAlignRule="Right">
    <!-- created by ParamML Examples on 09.02.2023 -->
    <P N="width" V="20" Role="Input" />
    <P N="height" V="10" Role="Input" />
    <O N="Vol" T="Volume" Z="height" Opacity="0.9">
        <O N="surface1" T="Surface" Z="0">
            <O T="Point" X="width" Y="-width" />
            <O T="Point" X="width" Y="width" />
            <O T="Point" X="-width" Y="width" />
            <O T="Point" X="-width" Y="-width" />
        </O>
        <O N="surface2" T="Surface" Z="height">
            <O T="Point" X="width/2" Y="-width/2" />
            <O T="Point" X="width/2" Y="width/2" />
            <O T="Point" X="-width/2" Y="width/2" />
            <O T="Point" X="-width/2" Y="-width/2" />
        </O>
    </O>
    <O N="BottomSection" T="CADD" RZ="PI/2">
        <O T="CADDShape">
            <O T="Point" X="width" Y="-width" />
            <O T="Point" X="width" Y="width" />
            <O T="Point" X="-width" Y="width" />
            <O T="Point" X="-width" Y="-width" />
        </O>
    </O>
    <O N="TopSection" T="CADD" DisplayWidth="1">
        <O T="CADDShape">
            <O T="Point" X="width/2" Y="-width/2" />
            <O T="Point" X="width/2" Y="width/2" />
            <O T="Point" X="-width/2" Y="width/2" />
            <O T="Point" X="-width/2" Y="-width/2" />
        </O>
    </O>
    <O T="Document" Title="Document Example">
        <O T="DocSection" Title="Introduction ">
            <O T="DocText">
                Width |width|, height |height| This is an example of a text description for an object created using a ParamML parametric language
            </O>
        </O>
        <O T="DocSection" Title="3D Model ">
            <O T="DocText">
                <![CDATA[
            --md
                In this section of the document, a visual representation of the 3D object will be provided.
            ]]>
            </O>
            <O T="Doc3D" Width="600" Height="300">
                <P N="Obj3D" V="Vol" />
            </O>
        </O>
        <O T="DocSection" Title="CADD Drawing ">
            <O T="DocText">
                In this section of the document, a visual representation section of the 2D object will be provided.
            </O>
            <O T="DocText">
                Top Section
            </O>
            <O T="DocCADD" Width="400" Height="300">
                <P N="CADD" V="TopSection" T="CADD" />
            </O>
            <O T="DocText">
                Bottom Section
            </O>
            <O T="DocCADD" Width="400" Height="300">
                <P N="CADD" V="BottomSection" T="CADD" />
            </O>
        </O>
        <O T="DocSection" Title="ParamML Code ">
            <O T="DocCode" Width="300" Height="400">
                n="Vol" t="Volume" z="height" opacity="0.9">
                <o t="Point" x="-width/2" y="width/2">
                    <o t="Point" x="-width/2" y="-width/2">
                    </o>
                </o>
            </O>
        </O>
        <O T="DocSection" Title="Picture ">
            <O T="DocImage" Image="" />
        </O>
        <O T="DocSection" Title="Inputs">
            <O T="DocInput" Param="width" />
            <O T="DocInput" Param="height" />
        </O>
        <O T="DocSection" Title="28 days Concrete strength ">
            <O T="DocTable">
                <O T="DocRow">
                    <O T="DocCell">
                        concrete grade
                    </O>
                    <O T="DocCell">
                        Typical Compressive Strength fck (MPa)
                    </O>
                    <O T="DocCell">
                        Typical Axial Tension Strength fctk (MPa)
                    </O>
                </O>
                <O T="DocRow">
                    <O T="DocCell">
                        C16/20
                    </O>
                    <O T="DocCell">
                        16
                    </O>
                    <O T="DocCell">
                        1.4
                    </O>
                </O>
                <O T="DocRow">
                    <O T="DocCell">
                        C18/22
                    </O>
                    <O T="DocCell">
                        18
                    </O>
                    <O T="DocCell">
                        1.5
                    </O>
                </O>
                <O T="DocRow">
                    <O T="DocCell">
                        C20/25
                    </O>
                    <O T="DocCell">
                        20
                    </O>
                    <O T="DocCell">
                        1.6
                    </O>
                </O>
            </O>
        </O>
        <O T="DocSection" Title="Diagram ">
            <O T="DocGraph" Width="400" Height="300" Title="X Graph" DataList="[[0,0],[1,3],[2,4],[3,4.5],[4,4.75],[5,4.75],[6,4.5]]" AxisLabelY="Force(N)" AxisLabelX="Disp(mm)" />
        </O>
    </O>
</O>

To view this example in the library, see (https://openbrim.org/platform/?application=inc&author=ParamML_Examples_OpenBrIM+Platform&obj=objid0f7ab4sjh1fl38g9nx5clhn)

8)DocSectionAnalysis:
With this object, section analysis and calculations, such as rebar stress, flexural capacity, and interaction diagrams, can be displayed in the document. The values that affect the results can be overridden in the document, and changes in the results along the section can be reviewed instantaneously.

Example :

Version	Old Version 6	New Version Current
Changes made by	mert.goktas	Harika Inanc (Unlicensed)
Saved on	Feb 10, 2023	Aug 11, 2023

Versions Compared

Key