| Info |
|---|
After clicking on ‘Superstructure Code Checks> Bolted Field Splice Code Check (AASHTO)' in the navigation treeview, follow the steps to define the Bolted Field Splice Code Check. You can use the collapsed documentation page below for more information on the explanations of each parameter. |
| Expand | ||
|---|---|---|
| ||
| Bolted Field Splice Code Check (AASHTO) [SIG] |
| 1 | 🖱️ Click three-dots icon on Splice cell and select a Bolted Field Splice as Splice1. |    | ||||||||||
| 2 | As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the code check template is define in the next step. |  | ||||||||||
| 3 |
| |||||||||||
| 4 | 🖱️ Click the three-dots icon on the Code Check Template cell, and then set SpliceCCT. |  | ||||||||||
| 5 | 🖱️ Set name as Splice1CC. |  | ||||||||||
| 6 | Proceed to the next step to verify the model. | |||||||||||
| Anchor | ||||
|---|---|---|---|---|
|
| Tip |
|---|
The completed bolted field splice code check is illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips. |
| Tip |
|---|
To view the entire procedure explained on this page, please watch the recorded Video below. |