Versions Compared

Version Old Version 6 New Version Current
Changes made by

Umut Nuhat Sevinc

Melis Ceylan

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Expand
titleConcrete Deck
Concrete Deck [SIG]
1
(blue star)

🖱️ Click three-dots icon on Cross Sections cell and Edit.

Image Removed

image-20240928-154206.pngImage Added

2
(blue star)

🖱️ Click the three-dots icon on the Cross Section Location cell, and then set Abut1.

Image RemovedImage Removed

image-20240928-154246.pngImage Added

3

As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the

bolt property is

Cross Section, Girders and Material are set in the next step.

Image Added
4

Insert excerpt
_Quick Tips
_Quick Tips
nameIssue
nopaneltrue

5
(blue star)

🖱️ Keep the Offset from Support Line as default.
🖱️ Click the three-dots icon on the Cross Section cell, and then set DCS1.

Image Added
6

🖱️ Keep the Skew Angle as default.
🖱️ Click the three-dots icon on the Variation w/Next Segment cell, and then set Linear.

Image Added
7

🖱️ Move to the second row.

🖱️ Click the three-dots icon on the Cross Section Location cell, and then set Abut4.

Image Added
8

🖱️ Click three-dots on the first cell of the Girders and pick the girders G1, G2, G3, G4

image-20240928-154453.pngImage Addedimage-20250117-135228.pngImage Addedimage-20240928-154558.pngImage Added

9

🖱️ Keep Taper as default.

image-20240928-154619.pngImage Added

10

🖱️ Click the three-dots icon on the Material cell, and then select Fc_4ksiforDeck.

 

If you have reached this stage and you don't have a material to select, and if you want to use the Import Button, you can refer to the Quick Tip.

image-20240928-154652.pngImage Addedimage-20240928-154710.pngImage Addedimage-20240928-154745.pngImage Added

11

Insert excerpt
_Quick Tips
_Quick Tips
nameImportMaterial
nopaneltrue

12

🖱️ Click three-dots icon on Deck Reinforcement Data cell and Edit.

image-20240928-154814.pngImage Added

13

🖱️Enter the Start Station as 0.

Image Added
14

🖱️Enter the End Station as 530.

Image Added
15

🖱️ Click the three-dots icon on the Deck Rebar Material cell, and then set A615_60.

Image Added
16

🖱️Enter the Long. Deck Rebar Spacing (Top Layer) and Long. Deck Rebar Spacing (Bottom Layer) as 5.

Image Added
17

🖱️ Click the three-dots icon on the Long. Deck Rebar (Top Layer) cell, and then set ASTMA615No8.

Image Added

18

🖱️ Click the three-dots icon on the Long. Deck Rebar (Bottom Layer) cell, and then set ASTMA615No6.

Image Added
19

🖱️ Keep the Clear Cover(Top) as default.

Image Added
20

🖱️Enter the Clear Cover(Bottom) as 3.

Image Added
21

🖱️ Keep the Concrete creep adjustment factor as default.

Image Added
22

🖱️ Keep FEA and 3D Settings tabs parameters as default.

image-20240929-073151.pngImage Addedimage-20250117-134952.pngImage Added

23

When the steps are completed, the shared screenshot displayed in the adjacent cell should be visible in the 3D view of OpenBrIM.

Image Added
24

Proceed to the next step to verify the model.

Anchor
Photo
Photo

Tip

The completed concrete deck is illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips.

Insert excerpt
_Quick Tips
_Quick Tips
nameModelButton
nopaneltrue

...

Insert excerpt
_Quick Tips
_Quick Tips
nameFEAButton
nopaneltrue

...

Tip

To view the entire procedure explained on this page, please watch the recorded Video below.

Deck.mp4