...
Expand | ||
---|---|---|
| ||
General load cases such as dead, snow, wind on structure are declared from this tab Load pattern application settings such as Weight Factors and Load Type can be changed from Data tab. Response of a structure ( Linear, Nonlinear, Tolerance ) can be modified from Nonlinear tab. If project have multiple elements that are effected by different type of load cases at the same time, user can arrange a grouping system and interpret it in Settings tab by assigning a Structure Group to a Load Case |
...
Expand | ||
---|---|---|
| ||
Surface specific point load, point moment, uniform load can be created with this tab. System parameter defines whether Load Inputs are calculated using Global or Local coordinate systemof related surface. |
...
Expand | ||
---|---|---|
| ||
User defined, coordinate specific force driven load can be created with this tab. |
...
Expand | ||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||||||||||||||||||||
Loads due to temperature change is defined from Temperature Loads tab. User should define at least 2 different Temperature load to observe effects of temperature difference on objects.
Exp.- Expansion Contr. - Contraction |
...
Expand | ||
---|---|---|
| ||
Provided that there are tendons tendons in project, user should provide Start-End stresses for the tendons. This can be done from this tab. |
...