Foundation walls are defined and drawn from this section.
...
...
| userGroups | Turkish |
|---|
...
Temel duvarının tanımlandığı yerdir.
...
Figure 1
→ Click Foundation Wall button as shown in the “Foundation Wall” button (Figure 1).
| Show if | ||
|---|---|---|
| ||
Temel duvarı çizmek için Figure 1’deki butona tıklanır. |
...
Figure 2
...
Figure 2
→ You will see the question in your AutoCAD command line (Figure 2). Enter the floor number at which the foundation wall will be drawn to AutoCAD command line as demonstrated in Figure 2to be generated.
...
Figure 3
→ Draw the foundation wall analytical line as illustrated in the centerline of the foundation wall (Figure 3).
...
Figure 4
→ Select the material of the foundation wall and enter the thickness of the foundation wall in the spreadsheet as shown in (Figure 4).
→ Click No the ”No Break Pts Pts” button to add break points breakpoints. Click to the point where break point the breakpoint(s) to be added.
Once the foundation wall is divided into parts by break points breakpoints, propeties the properties of each part such as thickness or offset values can be entered differently. To enter different thickness or offset value to foundation wall parts enter “,” between each value as illustrated in Figure 5.
...
Figure 5
| Show if | ||
|---|---|---|
| ||
Figure 2’de görülen AutoCAD komut satırına temel duvarı çizilmek istenen kat girilir ve sonrasında çizim yapılır. |
...
| userGroups | Turkish |
|---|
...