...
| Info |
|---|
Cross Frame Gusset Plate Sections database is created solely for this purpose. One important thing here is that sections are previously defined for five categories, and although the shapes can be manipulated, choosing the correct category is vital in order for gusset plates to be generated at the intended locations.  
|
| Note |
|---|
When positioning the gusset plates at the Top Left, Bottom Left, and Center points, it should be remembered that the reference point is ‘(0,0)’. The bolt arrangement and bolt offsets will be determined based on this reference (0,0) point . Additionally, the offset inputs of the gusset plate in the cross frame (vertical and horizontal) will also be determined according to this reference (0,0) point. When defining a custom shape, attention should be paid to the reference point. |
...
Thickness: This parameter specifies the thickness of the gusset plate.
| Info |
|---|
Sections specific to the Tub Girder for 'Top-Left'
 |
| Info |
|---|
Sections specific to the Tub Girder for 'Bottom-Left'
 |
Bolt
Bolts for gusset plates can be defined using the parameters in this tab. For each category, the bolts will be defined with respect to the (0,0) reference point.
...