...
Label
...
Mandatory
...
Name and Type Attributes
...
Default Description and Value Attributes
...
Other Attributes
...
1
...
Slope
...
yes
...
N="Slope"
...
D="Eğim: The slope of the cross-section segment. Positive slope for inclination from left to right looking up-station on the alignment."
V="0"
...
Role="Input"
UT="Length"
UC="Coordinate"
...
2
...
Width
...
yes
...
N="Width"
...
Bir güzergahta birden fazla T="crosssectionCrosssection" objesi tanımlanabilir. Yolun durumuna göre belli bir kilometreden sonra eğim değişikliği yapmak için başka enine kesitler tanımlanır. Station o kesitin başlama noktası, LeftEdgeToHCL o kesitin yarı genişliğini verir. T="crossSectionSegmentCrossSectionSegment" objesi altında Slope, enine kesitin eğimini, Width ise o kesitin genişliğini ifade eder. Yani yolun tüm geniştiğini genişliğini CrossSectionSegment altında parçalara ayırabilir farklı eğimler tanımlayabiliriz.
Enine Kesit için parametreler
...
Label
...
Mandatory
...
Name and Type Attributes
...
Default Description and Value Attributes
...
Other Attributes
...
1
...
Station
...
yes
...
N="Station"
...
D="Station: The longitudinal location of the cross-section along the alignment line."
V="0"
...
Role="Input"
UT="Length"
UC="Coordinate"
...
2
...
Left Edge to HCL
...
yes
...
N="LeftEdgeToHCL"
...
D="Left Edge to HCL: Transverse location of the left edge of the cross-section from the horizontal control line (from left-hand side looking up-station)."
V="0"
...
Role="Input"
UT="Length"
UC="Coordinate"
...
.
...
...
Role="Input"
UT="Length"
UC="Coordinate"
Örnek:
Code Block | ||||
---|---|---|---|---|
| ||||
<O N="Enine kesit" T="CrossSection"> <P N="Station" V="300" /> <P N="LeftEdgeToHCL" V="100" /> <P N="ElevationAtHCL" V="0" /> <O N="Sol" T="CrossSectionSegment"> <P N="Slope" V="0.1" /> <P N="Width" V="100" /> </O> <O N="Sag" T="CrossSectionSegment"> <P N="Slope" V="-0.1" /> <P N="Width" V="50" /> </O> <O N="Sag1" T="CrossSectionSegment"> <P N="Slope" V="-0.1" /> <P N="Width" V="50" /> </O> </O> |
Şeklinde Şekilde görülen kesiti oluşturur.
Enine Kesit için Parametreler:
Label | Mandatory | Name and Type Attributes | Default Description and Value Attributes | Other Attributes | |
1 | Station | yes | N="Station" | D="Station: The longitudinal location of the cross-section along the alignment line." | Role="Input" |
2 | Left Edge to HCL | yes | N="LeftEdgeToHCL" | D="Left Edge to HCL: Transverse location of the left edge of the cross-section from the horizontal control line (from left-hand side looking up-station)." | Role="Input" |
Enine Kesit Segment Objesi için Parametreler:
Label | Mandatory | Name and Type Attributes | Default Description and Value Attributes | Other Attributes | |
1 | Slope | yes | N="Slope" | D="Eğim: The slope of the cross-section segment. Positive slope for inclination from left to right looking up-station on the alignment." | Role="Input" |
2 | Width | yes | N="Width" | D="Genişilk: The width of the cross-section segment along its slope." | Role="Input" |