Content Comparison

Click New from the left sidebar.

Click

Library and FEA Workflows template.

Click “New Project” from FEA Workflow to create a new project.

Enter the project name and the category.

Follow the workflow tree to enter data.

Enter X, Y and Z as 0.

Click on the icon above the analysis icon from the left sidebar.

Click the FEA icon.

Click on the DOF tab.

Click on the three-dots icon next to Tx and set Fixed.

Click on the dot at the bottom right of the Tx cell.

Drag and drop from cell Tx to cell Rz.

Click Zoom Extend icon from the right sidebar.

Go to Geometry > Lines

Click on the three-dots icon on Node 1 and select a node.

Set the other node in the same way to create a line.

Click on the three-dots icon next to Name and select Break.

Set the number of segments along local X.

Go to Properties > Materials

Click on the three-dots icon next to Name and select Import Material.

Image Added

Image Added

Go to Properties > Sections

Click on the three-dots icon next to Name and select Import Section.

Go to Geometry > Lines

Click on the three-dots icon next to Section at Start and select a section.

Go to Loads> Static Loads> Load Cases

Enter Weight Factor Z as -1.

Go to Loads> Static Loads> Nodal Loads

Click on the three-dots icon next to Node and select a node.

Click on the three-dots icon next to Load Case and select a load case.

Enter Fz as -5.

Click on the selection box under the settings icon in the left sidebar.

Select the Loading.

Click Analysis from the left sidebar.

Click on the selection box under the settings icon in the left sidebar.

Select the Deformed.

Go to Loads> Results> Node Displacements

Go to Loads> Results> FELine Forces