...
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
Follow the next steps to define temperature loads. |
...
Go to Loads/Temperature Load/Uniform Temperature Load.
...
...
There are two cases for expansion and contraction. For expansion,
Select Bridge, and Stage as TU_ExpStage.
...
Specify Temperature as 40F.
...
...
For contraction, go to the 2nd row. Select Bridge, and Stage as TUContrStage.
...
Specify Temperature as -40F.
...
Name these two cases as TU_ExpCase and TU_ContrCase, respectively.
...
Go to Uniform Temperature load under Temperature Load on the tree view.
...
Copy related General from model inputs and paste into OpenBrIM.
...
| Info |
|---|
After clicking on ‘Loading> Loads> Temperature Load> Uniform Temperature Load' in the navigation treeview, follow the steps to define the Temperature Load. You can use the collapsed documentation page below for more information on the explanations of each parameter. |
| Expand | ||
|---|---|---|
| ||
| Uniform Temperature Load [SIG] |
| 1 | 🖱️ Click three-dots icon on Stage cell and select a Construction Stage as TUExpStage. |    | ||||||||||
| 2 | As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the bridge is define in the next step. |  | ||||||||||
| 3 |
| |||||||||||
| 4 | 🖱️ Click the three-dots icon on the Bridge cell, and then set BRG1. |  | ||||||||||
| 5 | 🖱️Enter the Temperature Change from Mean as 40. |  | ||||||||||
| 6 | 🖱️ Set name as TU_Exp. |  | ||||||||||
| 7 | To model all the uniform temperature loads, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model. | |||||||||||
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
Uniform Temperature Load | ||
|---|---|---|
General
|
| Anchor | ||||
|---|---|---|---|---|
|
| Tip |
|---|
The completed uniform temperature loads are illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips. |
...
| Tip |
|---|
To view the entire procedure explained on this page, please watch the recorded Video below. |
...