Versions Compared

Version Old Version 24 New Version Current
Changes made by

Umut Nuhat Sevinc

Melis Ceylan

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Expand
titlePier Column
Pier Column [SIG]
1

(blue star) 🖱️ Click the three-dots icon on the Cap cell, and then set PierCap1.

Image Removed

image-20240929-100125.pngImage Added

2

As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the pier column section is define in the next step.

3

Insert excerpt
_Quick Tips
_Quick Tips
nameIssue
nopaneltrue

4

(blue star) 🖱️ Click three-dots icon on the Section Data cell and click Edit.

Image Removed

image-20240929-100206.pngImage Added

5

(blue star)🖱️Enter the Section Length as 50.

6

(blue star) 🖱️ Click three-dots icon on Start Section cell and select a Section as PierColumnCircle.

If you have reached this stage and you don't have a section to select, and if you want to use the Import Button, you can refer to the Quick Tip.

7

Insert excerpt
_Quick Tips
_Quick Tips
nameImportSection
nopaneltrue

8

(blue star) 🖱️ Click three-dots icon on End Section cell and select a Section as PierColumnCircle.

9

(blue star)🖱️Enter the Transverse Offset as 16.5.

Image Removed

image-20240929-100508.pngImage Added

10

Insert excerpt
_Quick Tips
_Quick Tips
nameTransverseOffsetDefinition
nopaneltrue

11

(blue star) 🖱️ Keep the Rotation Angle as default.

Image Removed

image-20240929-101133.pngImage Added

12

(blue star)🖱️Enter the Bottom Elevation as -40.

Image Removed

image-20240929-100533.pngImage Added

13

(blue star) 🖱️ Keep the FEM and Pushover as default.

Image Removedimage-20240929-100630.pngImage Addedimage-20240929-100609.pngImage Added
14

(blue star) 🖱️ Set name as PierColumn1.

Image Removed

image-20240929-100710.pngImage Added

15

When the steps are completed, the shared screenshot displayed in the adjacent cell should be visible in the 3D view of OpenBrIM.

16

To model all the pier column, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model.

...

Tip

To view the entire procedure explained on this page, please watch the recorded Video below.

...