...
| 1 | 🖱️ Click the three-dots icon on the Girder cell, and then set G1. | 
| ||||||||||
| 2 | 🖱️Enter the Start Station as 1.975. | 
| ||||||||||
| 3 | 🖱️Enter the End Station as 73. | 
| ||||||||||
| 4 | Start and End Station parameters of the Shear Stud should take into account skew angle. | |||||||||||
| 5 |
| |||||||||||
| 6 | You can edit the dimensions of Shear Stud from Shear Stud tab. 🖱️Enter the No. of Studs per Row as 3. | 
| ||||||||||
| 7 | You can enable/disable display the detailing of shear studs by editing Show Studs as in splice spreadsheet. |  | ||||||||||
| 8 | When the steps are completed, the shared screenshot displayed in the adjacent cell should be visible in the 3D view of OpenBrIM. |  | ||||||||||
| 9 | To model all the shear studs, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model. | |||||||||||
...
| Insert excerpt | ||||||||
|---|---|---|---|---|---|---|---|---|
|
...
| Tip |
|---|
To view the entire procedure explained on this page, please watch the recorded Video below. |
...