Versions Compared

Version Old Version 20 New Version Current
Changes made by

Umut Nuhat Sevinc

Umut Nuhat Sevinc

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Info

Follow the steps below after After clicking on 'Superstructure > Steel Girders > Plate Girder' in the navigation treeview, follow the steps to define the Plate Girder. You can use the collapsed documentation page below for more information on the explanations of each parameter.

Expand
titlePlate Girder
Plate Girder [SIG]
1

(blue star) Click three-dots icon on Girder Layout cell and set a layout.

Image Modified

 

2

Edit the plate girder dimensions. To enter a station-dependent dimension;

3

(blue star) Click three-dots icon on Top Flange Width cell and Edit (spreadsheet).

Image Modified

 

4

(blue star) Enter the Start Station as 0.

Image Modified
5

If the user enters the length along the girder, the end station and Station Difference will be calculated automatically. Conversely, if the user enters the end station, the length and Station Difference data will be calculated automatically.

Image RemovedImage RemovedImage Removed

6
Please enter the following values sequentially:
1st row - Start Station: 0, End Station: 113.30, Top Flange Width: 16
2nd row - Start Station: 113.30, End Station: 136.20, Top Flange Width: 21
3rd row - Start Station: 136.20, End Station: 156.20, Top Flange Width: 21
4th row - Start Station: 156.20, End Station: 176.20, Top Flange Width: 21
5th row - Start Station: 176.20, End Station: 197.30

(blue star) Set the Length parameter to 100. After this operation, the End Station and Station Difference parameters will be automatically calculated.

Image Added
7

(blue star) Set the Station Difference parameter to 120. After this operation, the End Station and Length parameters will be automatically calculated.

Image Added
8

(blue star) Set the Start Station parameter to 36. After this operation, the End Station, Station Difference and Length parameters will be automatically calculated.

Image Added
9

(blue star) Please enter the following values sequentially:
1st row - Start Station: 0, End Station: 113.30, Top Flange Width: 16
2nd row - Start Station: 113.30, End Station: 136.20, Top Flange Width: 21

6th

3rd row - Start Station:

197

136.

30

20, End Station:

361

156.

30

20, Top Flange Width:

18Image Removed7

Top Flange Thickness, Web Depth and Thickness, Bottom Flange Width and Thickness, Haunch Thickness, and Additional Haunch Width Parameters can be defined similarly to Top Flange Width.

8
Expand
titleQuick Tip

When encountering the warning as seen in OpenBrIM app, there is a "issue" , it is advised to review the parameters you have provided. This warning suggests that there might be a missing or incorrect parameter in your input. Check inputs to ensure they are accurate and complete.

9

When a warning is clicked, the reason can be displayed. The warning is expressed in the format of Warning Incoming Object Group > Object Name > Parameter Name.

Image RemovedImage Removed

10

To remove the warning, you need to set a value for the parameter.
Click three-dots icon on Top Flange Material cells and select a Material as A709 50.

Image RemovedImage RemovedImage Removed

11

Expand
titleQuick Tip

The reason for selecting the material parameter instead of importing its value is that the material objects have already been imported previously.

12

21
4th row - Start Station: 156.20, End Station: 176.20, Top Flange Width: 21
5th row - Start Station: 176.20, End Station: 197.30, Top Flange Width: 21
6th row - Start Station: 197.30, End Station: 361.30, Top Flange Width: 18

Image Added
10

Top Flange Thickness, Web Depth and Thickness, Bottom Flange Width and Thickness, Haunch Thickness, and Additional Haunch Width parameters can be defined similarly to Top Flange Width.

11

As a result of these operations, an issue will appear on the OpenBrIM screen. This does not necessarily mean that any operation was done incorrectly. The issue will be resolved when the material is set in the next step.

12

Insert excerpt
_ConfluenceInclusions
_ConfluenceInclusions
nameIssue
nopaneltrue

13

(blue star) Click three-dots icon on Top Flange Material cells and select a Material as A709 50.


The reason for selecting the material parameter instead of importing its value is that the material objects have already been imported previously.

If you have reached this stage and you don't have a material to select, and if you want to use the Import Button, you can refer to the Quick Tip.

Image AddedImage AddedImage Added

14

Insert excerpt
_ConfluenceInclusions
_ConfluenceInclusions
nameImportMaterial
nopaneltrue

15

Web Material and Bottom Flange Material parameters can be defined similarly to Top Flange Material.

(blue star) Click three-dots icon on Web Material and Bottom Flange Material cells and select a Material as A709 50

Image Modified
13
16

You can edit the FE mesh settings of girders from FEA Settings tab.
(blue star) Keep the mesh size and number of result extraction as default.

Image Modified
Image Removed
14Copy Girder Parameters from model inputs and paste into OpenBrIM. Once the copy is finished, continue with the next step to check the completed
17

To model all the beams, you should go to the "model inputs" section on the page. The parameters here should be copied and pasted into the first cell in OpenBrIM.

Image RemovedImage Removed

To access additional details on each parameter, please refer to the following page.

Expand
titlePlate Girder
Plate Girder [SIG]

Follow the below steps to copy and paste all inputs from our data set.

When the steps are completed, the shared screenshot displayed in the adjacent cell should be visible in the 3D view of OpenBrIM.

Image Added
18

To model all the girders, copy the data below and paste the parameters into the first cell in OpenBrIM spreadsheet. Refer to the quick tip for an easy guide on how to perform the copy operation. After completing the copy, proceed to the next step to verify the model.

Insert excerpt
_ConfluenceInclusions
_ConfluenceInclusions
namePasteTip
nopaneltrue
Anchor
ModelInputsModelInputs

Plate Girders

Girder Parameters

Code Block
G1	GL1	[[0, 1359.6],16,[1359.6, 1634.3998738171965],21,[1634.3999999999999, 1874.4003949586574],21,[1874.3999999999999, 2114.4004094196357],21,[2114.3999999999996, 2367.599523173722],21,[2367.6000000000004, 4335.600480997627],18,16]	[[0, 1359.6],1,[1359.6, 1652.3999999999999],1.25,[1652.3999999999999, 1874.3999999999999],2.5,[1874.3999999999999, 2084.3999999999996],2.5,[2084.3999999999996, 2367.6000000000004],1.25,[2367.6000000000004, 3843.6000000000004],1,1]	[[0, 1359.6000171787562],84,[1359.6, 1634.3998738171965],84,[1634.3999999999999, 1874.4003949586574],84,[1874.3999999999999, 2114.4004094196357],84,[2114.3999999999996, 2367.599523173722],84,[2367.6000000000004, 4335.600480997627],84,84]	[[0, 1359.6000171787562],0.5625,[1359.6, 1634.3998738171965],0.625,[1634.3999999999999, 1874.4003949586574],0.625,[1874.3999999999999, 2114.4004094196357],0.625,[2114.3999999999996, 2367.599523173722],0.625,[2367.6000000000004, 4335.600480997627],0.5625,0.5625]	[[0, 1359.6000171787562],16,[1359.6, 1634.3998738171965],21,[1634.3999999999999, 1874.4003949586574],21,[1874.3999999999999, 2114.4004094196357],21,[2114.3999999999996, 2367.599523173722],21,[2367.6000000000004, 4335.600480997627],18,16]	[[0, 1359.6000171787562],1,[1359.6, 1634.3998738171965],1.5,[1634.3999999999999, 1874.4003949586574],3,[1874.3999999999999, 2114.4004094196357],3,[2114.3999999999996, 2367.599523173722],1.5,[2367.6000000000004, 4335.600480997627],1,1]	[[0, 1359.6000171787562],4,[1359.6, 1634.3998738171965],4,[1634.3999999999999, 1874.4003949586574],4,[1874.3999999999999, 2114.4004094196357],4,[2114.3999999999996, 2367.599523173722],4,[2367.6000000000004, 4335.600480997627],4,4]	4	A709_50	A709_50	A709_50
G2	GL2	[[0, 1381.1999999999998],15,[1381.1999999999998, 1664.3999999999999],18,[1664.3999999999999, 1904.3999999999999],18,[1904.3999999999999, 2144.3999999999996],18,[2144.3999999999996, 2404.8],18,[2404.8, 4405.200000000001],15,15]	[[0, 1381.1999999999998],1,[1381.1999999999998, 1664.3999999999999],1.25,[1664.3999999999999, 1904.3999999999999],2.5,[1904.3999999999999, 2144.3999999999996],2.5,[2144.3999999999996, 2404.8],1.25,[2404.8, 4405.200000000001],1,1]	[[0, 1381.1999999999998],84,[1381.1999999999998, 1664.3999999999999],84,[1664.3999999999999, 1904.3999999999999],84,[1904.3999999999999, 2144.3999999999996],84,[2144.3999999999996, 2404.8],84,[2404.8, 4405.200000000001],84,84]	[[0, 1381.1999999999998],0.5625,[1381.1999999999998, 1664.3999999999999],0.625,[1664.3999999999999, 1904.3999999999999],0.625,[1904.3999999999999, 2144.3999999999996],0.625,[2144.3999999999996, 2404.8],0.625,[2404.8, 4405.200000000001],0.5625,0.5625]	[[0, 1381.1999999999998],16,[1381.1999999999998, 1664.3999999999999],19,[1664.3999999999999, 1904.3999999999999],19,[1904.3999999999999, 2144.3999999999996],19,[2144.3999999999996, 2404.8],19,[2404.8, 4405.200000000001],17,16]	[[0, 1381.1999999999998],1,[1381.1999999999998, 1664.3999999999999],1.5,[1664.3999999999999, 1904.3999999999999],3,[1904.3999999999999, 2144.3999999999996],3,[2144.3999999999996, 2404.8],1.5,[2404.8, 4405.200000000001],1,1]	[[0, 1381.1999999999998],4,[1381.1999999999998, 1664.3999999999999],4,[1664.3999999999999, 1904.3999999999999],4,[1904.3999999999999, 2144.3999999999996],4,[2144.3999999999996, 2404.8],4,[2404.8, 4405.200000000001],4,4]	4	A709_50	A709_50	A709_50
G3	GL3	[[0, 1402.8000000000002],16,[1402.8000000000002, 1695.6000000000001],21,[1695.6000000000001, 1935.6000000000001],21,[1935.6000000000001, 2175.6000000000004],21,[2175.6000000000004, 2443.2],21,[2443.2, 4476],15,16]	[[0, 1402.8000000000002],1,[1402.8000000000002, 1695.6000000000001],1.25,[1695.6000000000001, 1935.6000000000001],2.5,[1935.6000000000001, 2175.6000000000004],2.5,[2175.6000000000004, 2443.2],1.25,[2443.2, 4476],1,1]	[[0, 1402.8000000000002],84,[1402.8000000000002, 1695.6000000000001],84,[1695.6000000000001, 1935.6000000000001],84,[1935.6000000000001, 2175.6000000000004],84,[2175.6000000000004, 2443.2],84,[2443.2, 4476],84,84]	[[0, 1402.8000000000002],0.5625,[1402.8000000000002, 1695.6000000000001],0.625,[1695.6000000000001, 1935.6000000000001],0.625,[1935.6000000000001, 2175.6000000000004],0.625,[2175.6000000000004, 2443.2],0.625,[2443.2, 4476],0.5625,0.5625]	[[0, 1402.8000000000002],18,[1402.8000000000002, 1695.6000000000001],21,[1695.6000000000001, 1935.6000000000001],21,[1935.6000000000001, 2175.6000000000004],21,[2175.6000000000004, 2443.2],21,[2443.2, 4476],20,18]	[[0, 1402.8000000000002],1,[1402.8000000000002, 1695.6000000000001],1.5,[1695.6000000000001, 1935.6000000000001],3,[1935.6000000000001, 2175.6000000000004],3,[2175.6000000000004, 2443.2],1.5,[2443.2, 4476],1,1]	[[0, 1402.8000000000002],4,[1402.8000000000002, 1695.6000000000001],4,[1695.6000000000001, 1935.6000000000001],4,[1935.6000000000001, 2175.6000000000004],4,[2175.6000000000004, 2443.2],4,[2443.2, 4476],4,4]	4	A709_50	A709_50	A709_50
G4	GL4	[[0, 396],20,[396, 1424.4],20,[1424.4, 1743.6000000000001],28,[1743.6000000000001, 1965.6000000000001],28,[1965.6000000000001, 2175.6000000000004],28,[2175.6000000000004, 2481.6000000000004],28,[2481.6000000000004, 4029.6000000000004],17,[4029.6000000000004, 4335.6],17,[4335.6, 4545.6],17,[4545.6, 4767.6],17,[4767.6, 5086.8],17,[5086.8, 6115.200000000001],17,[6115.200000000001, 6511.200000000001],17,20]	[[0, 396],1,[396, 1424.4],1,[1424.4, 1743.6000000000001],1.25,[1743.6000000000001, 1965.6000000000001],2.5,[1965.6000000000001, 2175.6000000000004],2.5,[2175.6000000000004, 2481.6000000000004],1.25,[2481.6000000000004, 4029.6000000000004],1,[4029.6000000000004, 4335.6],1,[4335.6, 4545.6],1,[4545.6, 4767.6],1,[4767.6, 5086.8],1,[5086.8, 6115.200000000001],1,[6115.200000000001, 6511.200000000001],1,1]	[[0, 396],84,[396, 1424.4],84,[1424.4, 1743.6000000000001],84,[1743.6000000000001, 1965.6000000000001],84,[1965.6000000000001, 2175.6000000000004],84,[2175.6000000000004, 2481.6000000000004],84,[2481.6000000000004, 4029.6000000000004],84,[4029.6000000000004, 4335.6],84,[4335.6, 4545.6],84,[4545.6, 4767.6],84,[4767.6, 5086.8],84,[5086.8, 6115.200000000001],84,[6115.200000000001, 6511.200000000001],84,84]	[[0, 386.8808817406342],0.5625,[386.8808817406342, 1391.5985973986435],0.5625,[1391.5985973986435, 1703.4479160439073],0.625,[1703.4479160439073, 1920.3356570242486],0.625,[1920.3356570242486, 2125.4996953705286],0.625,[2125.4996953705286, 2424.452998108654],0.625,[2424.452998108654, 3936.8049299200056],0.5625,[3936.8049299200056, 4235.758219455268],0.5625,[4235.758219455268, 4440.922291220193],0.5625,[4440.922291220193, 4657.810055021005],0.5625,[4657.810055021005, 4969.6594536354305],0.5625,[4969.6594536354305, 5974.377109635252],0.5625,[5974.377109635252, 6361.257911829753],0.5625,0.5625]	[[0, 386.8808817406342],21,[386.8808817406342, 1391.5985973986435],21,[1391.5985973986435, 1703.4479160439073],27,[1703.4479160439073, 1920.3356570242486],27,[1920.3356570242486, 2125.4996953705286],27,[2125.4996953705286, 2424.452998108654],27,[2424.452998108654, 3936.8049299200056],21,[3936.8049299200056, 4235.758219455268],21,[4235.758219455268, 4440.922291220193],21,[4440.922291220193, 4657.810055021005],21,[4657.810055021005, 4969.6594536354305],21,[4969.6594536354305, 5974.377109635252],21,[5974.377109635252, 6361.257911829753],21,21]	[[0, 386.8808817406342],1,[386.8808817406342, 1391.5985973986435],1.5,[1391.5985973986435, 1703.4479160439073],1.5,[1703.4479160439073, 1920.3356570242486],3,[1920.3356570242486, 2125.4996953705286],3,[2125.4996953705286, 2424.452998108654],1.5,[2424.452998108654, 3936.8049299200056],1.5,[3936.8049299200056, 4235.758219455268],1.5,[4235.758219455268, 4440.922291220193],1.5,[4440.922291220193, 4657.810055021005],1.5,[4657.810055021005, 4969.6594536354305],1.5,[4969.6594536354305, 5974.377109635252],1.5,[5974.377109635252, 6361.257911829753],1.5,1]	[[0, 386.8808817406342],4,[386.8808817406342, 1391.5985973986435],4,[1391.5985973986435, 1703.4479160439073],4,[1703.4479160439073, 1920.3356570242486],4,[1920.3356570242486, 2125.4996953705286],4,[2125.4996953705286, 2424.452998108654],4,[2424.452998108654, 3936.8049299200056],4,[3936.8049299200056, 4235.758219455268],4,[4235.758219455268, 4440.922291220193],4,[4440.922291220193, 4657.810055021005],4,[4657.810055021005, 4969.6594536354305],4,[4969.6594536354305, 5974.377109635252],4,[5974.377109635252, 6361.257911829753],4,4]	4	A709_50	A709_50	A709_50

Anchor
Photo
Photo

Tip

Completed The completed girders is are illustrated below. Please verify that you have the same model on your end by examining each view provided here. For more information on how to perform visual checks, refer to the quick tips.

Insert excerpt
_ConfluenceInclusions
_ConfluenceInclusions
nameModelButtonTip
nopaneltrue

...

Tip

To view the entire procedure explained on this page, please watch the recorded GIF Video below.

...

titleGIF

...

20230921135036.mp4